Page 2
THANK YOU FOR CHOOSING BC NORTHERN LIGHTS Although the RoomMate is very straight-forward to use, the following manual contains a few guidelines to make your growing experience even easier. Tools Required: Adjustable screwdriver, glass cleaner, and cloth RoomMate Packing & Checklist...
• Surge protector or universal power supply 4. Hydro4 reservoir or Hydro4 lid Remove all accessories and parts from the reservoir inside the unit. It is a lot easier to assemble the RoomMate with everything outside the unit. The Hydro4 lid is quite flexible. If you have trouble getting it out the doors just tilt it a little or give it a squeeze upward from each end.
• Hook up the pump adapter to the ECO 185 water pump (fig. 1.5 a, b). plugged into the wall. Airpump shutoff switch is located on the front of the machine. • Remove all accessories and parts from the reservoir inside the unit. It is a lot easier to assemble your RoomMate with HELPFUL HINT You may need to soak the adapter in hot water to make inserting easier.
System Assembly (optional) T-5 Bulb Installation Installing Your T-5 Bulbs (optional) • Mount all three T-5 lights onto the irrigation lid by pressing them into the metal T-5 clips. • On the ends of each T-5 ballast, is a slot for the power cable to connect to them. One end is male (has 2 5psi pins), and the other end is female (has 2 holes).
Page 6
20 mins. MAKE SURE YOU DO NOT RUN YOUR switches are in the OFF position. You can ONLY set the time on your RoomMate when all of your switches are OFF.
At BC Northern Lights we offer a 3-year warranty on all components of the RoomMate except bulbs. Please call your BC Northern Lights rep to explain the problem as there might be an easy fix without having to replace a part.
Need help?
Do you have a question about the RoomMate and is the answer not in the manual?
Questions and answers