User's Guide
Disabling Wi-Fi from the Control Panel
When Wi-Fi is disabled, the Wi-Fi connection is disconnected.
1. Select
on the home screen.
To select an item, move the focus to the item using the
2. Select Wi-Fi (Recommended).
The network status is displayed.
3. Select Change Settings.
4. Select Others > Disable Wi-Fi.
5. Check the message, and then start setup.
6. When a completion message is displayed, close the screen.
The screen automatically closes after a specific length of time.
7. Close the network connection settings screen.
Disconnecting Wi-Fi Direct (Simple AP) Connection
from the Control Panel
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specific device, disconnect from the device
instead of the printer.
Network Settings
u d l r
buttons, and then press the OK button.
41
Need help?
Do you have a question about the ET-3750 series and is the answer not in the manual?
Questions and answers
My printer suddenly will not print. It has been getting slower over thae last 10 days and now does not [print at all. Please help
@Bruce McGregor