Using The Network After Moving Location; Sharing Internet Access - Samsung NC10 User Manual

Using the network after moving
location
address, printer setting, etc.) for each
location, you can immediately access the
setting procedures regardless of your
location.
1
when connected to the Internet.
2
Select an icon that represents the
corresponding location from the
Saved Locations window and then
3
selected location are applied, the new
information are displayed in The
detailed Information for window.

Sharing Internet Access

Set one computer as the sharing server
and another computer as the client for
two computers to share an Internet using
is complete, you can use the Internet
immediately.
If you perform Internet sharing
setup by using Samsung Network
Manager, the program must be
installed into both computers.
There are three methods for setting each
computer as a sharing server and a client
as shown in the table. This document
describes how to do so by giving an
example to the typical connection method
1 (Wire+Wireless).
Sharing Server (Hereinafter
referred to as server)
Computer that is equipped with two
LANS and is directly connected to an
Internet.
Sharing Client (Hereinafter
referred to as client)
Computer that is not directly
connected to the Internet and is
able to use the Internet through the
sharing server.
103