Charging The Battery Pack - Sanyo W32SA Basic Manual

Charging the Battery Pack

The battery pack is not fully charged at the time of purchase.
When you use the W32SA for the first time, charge the battery pack.
How to Charge the Battery Pack
Connect the SANYO AC Adapter 04 to the Desktop Holder.
Check the pin configuration and orientation of the connector before
connecting the adapter.
Plug the power plug of the SANYO AC Adapter 04 into an AC outlet.
Attach the W32SA phone in which the battery pack is
installed to the Desktop Holder.
To detach, hold down the Desktop Holder and detach the W32SA phone.
AC outlet
• The cellphone beeps and the incoming illuminator lights red. → Charging in progress.
• The cellphone beeps and the incoming illuminator goes off. → Charging completed.
Information
The battery pack can also be charged by directly
inserting the SANYO AC Adapter 04 connector into
the external connector on the W32SA phone.
12
SANYO AC Adapter 04
Incoming illuminator
(Light is red.)
Desktop Holder
①
②