Miele AWG 102 Installation Instructions Manual page 13

 Feed the flexible ducting through the
telescopic wall pipe and secure it to
the collar on the motor unit fixing
bracket with a hose clip.
 Secure the bracket to the external
wall with 3 screws.
 Extend the flexible ducting from the
inside of the wall along the wall pipe
and seal the gap between the ducting
and the wall pipe with jointing
compound.
 Refit the motor unit and secure with
the 2 screws on the underside of the
external motor.
 Connect the control cable plug
connectors.
 Use the extension cable supplied to
lengthen the connection cable if
necessary.
Installation
13