Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Satellite AV Manuals
  4. Antenna
  5. GEOSATpro GS120 DiSEqC
  6. Manual

Satellite AV GEOSATpro GS120 DiSEqC Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Installation Guide:
Installation Guide:
GEOSATpro GS120 DiSEqC Motorized Satellite Dish Mover
GEOSATpro GS120 DiSEqC Motorized Satellite Dish Mover
Items needed for installation:
1.
DiSEqC / USALS Compatible GEOSATpro GS120 Motor or Similar
2.
Fortec Star Mercury II / Visionsat IV-200 Satellite Receiver with USALS
3.
Assembled 76cm – 1.2 Meter Dish
4.
LNBF (KU-Band Standard Type)
5.
5' Coax Jumper
6.
Portable TV with cables for connecting to the satellite receiver output
Satellite aiming Calculator is available at:
Available channels and broadcaster information can be found at:
What to learn more about Free to Air Satellite and share your FTA experience with a helpful and
friendly group? Visit:
1.
Assemble the motor using the motor assembly manual. Securely tighten the bolt that attaches
the post to the motor with an Allen wrench. A loose bolt will cause the dish to slip out of position.
Satellite AV, LLC
lite AV, LLC
8801 Washington Blvd., Suite 101
8801 Washington Blvd., Suite 101
Roseville, CA 95678
Roseville, CA 95678
888-483-4673
888-483-4673
Local 916-677-0720
Local 916-677-0720
Fax 916-677-6228
Fax 916-677-6228
http://www.geosatfinder.com
http://www.satelliteguys.us
http://www.lyngsat.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the GEOSATpro GS120 DiSEqC and is the answer not in the manual?

Questions and answers

Summary of Contents for Satellite AV GEOSATpro GS120 DiSEqC

  • Page 1 Fax 916-677-6228 Fax 916-677-6228 Installation Guide: Installation Guide: GEOSATpro GS120 DiSEqC Motorized Satellite Dish Mover GEOSATpro GS120 DiSEqC Motorized Satellite Dish Mover Items needed for installation: DiSEqC / USALS Compatible GEOSATpro GS120 Motor or Similar Fortec Star Mercury II / Visionsat IV-200 Satellite Receiver with USALS Assembled 76cm –...
  • Page 2 Place Motor Post Through Top of Dish Post Clamp and Secure Mount the assembled dish onto the motor post. Place the dish post clamp top bolt through the elevation bracket then through the top alignment hole in the motor post. Securely tighten the bolt. Determine the Longitude and Latitude for the installation location.
  • Page 3 Dish Elevation Angle Set the Dish Elevation Angle on the dish elevation bracket using the Dish Angle Table on page 6 of the GeoSat GS120 Motor Manual. The dish elevation angle will be between 20 and 30 degrees. Loosely secure the two dish elevation bolts, as the elevation may need to be adjusted for the dish to properly track the satellite arc.
  • Page 4 Carefully Route and Secure Coax Cables Connect a coax cable from the LNBF to the motor port labeled “To LNB”. Clear all obstructions to permit dish movement. Always keep the area clear when programming and moving the motorized dish. Warning: The dish may suddenly move when connected to the receiver! Unplug the receiver from the electrical outlet.
  • Page 5 Select ANTENNA SETUP, Press OK Select Satellite and choose Galaxy25Ku 97W by pressing LEFT or RIGHT ARROW, Select LNB Type and set to LNB-10750 (Standard), Select Transponder and press the RIGHT ARROW to select an Active Transponder (example: 12177 V 23.000), Select Positioner and set to USALS, Press OK Select LONGITUDE and enter your installation location Longitude using the Numeric Keys Use the RIGHT ARROW to...
  • Page 6 Select Mode and choose Scan FTA to set the search for all Select Mode and choose Scan FTA to set the search for all available free and unencrypted channels. Select Start Scan and available free and unencrypted channels. Select Start Scan and Press OK.
  • Page 7 then identify the available free TV and radio channels. When completed, an on-screen prompt will ask, ”Do You Want to Save?” Press the RIGHT ARROW to select YES and Press OK. Now that multiple satellites are programmed, when the satellite channel is changed on the receiver, the motor will automatically move the dish to the correct satellite location and the selected channel will appear.
  • Page 8 In Dish Setting Menu: Select Satellite 97.0W Galaxy25, Transponder Frequency 12177, LNB Power ON, LNB Type Single, LNB Frequency 10750 (Standard), LNB 22KHZ OFF, DiSEqC SW OFF, Legacy SW OFF Press MENU to exit Dish Setting Menu “Setting is Changed. Do you want to save? Select YES, Press OK Select Satellite POSITIONER SETTING, Press OK Enter PIN code 0000 Select Satellite 97.0W Galaxy25, Transponder Frequency 12177,...
  • Page 9 The dish will rotate to the Galaxy25 satellite position based on the calculated values. Slightly loosen the motor on the mounting mast and rotate the motor assembly East or West on the post in very small movements while observing the Signal Quality meter. If a Signal Quality reading cannot be obtained or if the Quality is low or erratic, raise or lower the Satellite Dish Elevation by a degree and repeat the slow pan left or right rotation.

  • Page 10: Final Notes

    Now that multiple satellites are programmed, when the satellite channel is changed on the receiver, the motor will automatically move the dish to the correct satellite location and the selected channel will appear. This guide is not to be distributed or reproduced without credit to Satellite AV, LLC Copyright 2007...