Related Manuals for Comfee MFE508
Summary of Contents for Comfee MFE508
- Page 1 LAVATRICE MANUALE DI ISTRUZIONI MFE508 MFE510 MFE6 10 MFE6 12 MFE7 12 MFE812 Leggere attentamente questo manuale prima di utilizzare l'apparecchio...
-
Page 2: Table Of Contents
CONTENTS SAFETY INSTRUCTIONS Safety Instructions ..........INSTALLATION Product Description ..........Installation ............OPERATIONS Quick Start ............. Before Each Washing ..........Detergent Dispenser ..........Control Panel ............Option..............Other Functions ............Programmes............Washing Programmes Table ........MAINTENANCES Cleaning And Care ..........Trouble Shooting ............ -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS Safety Instructions For your safety,the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life. Explanation of the symbols: ！ Warning! This combination of symbol and signal word indicates a potentially dangerous situation which may result in... - Page 4 SAFETY INSTRUCTIONS • The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused. • Before any maintenance the device, unplug the appliance from the mains. • Always unplug the machine and turn off the water supply after use.
-
Page 5: Installation
SAFETY INSTRUCTIONS • Glass door may be very hot during the operation. Keep kids and pets far away from the machine during the operation very wet rooms as well as in the rooms with explosive or caustic gas. • Remove all packages and transport bolts before using the appliance. -
Page 6: Operating The Appliance
SAFETY INSTRUCTIONS • Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may result. Risk of damaging appliance! • Your product is only for home use and is only designed for the textiles suitable for machine washing. •... - Page 7 SAFETY INSTRUCTIONS • Make sure that all pockets are emptied. Sharp and rigid items such as coin,brooch,nail,screw or stone etc. may cause serious damages to this machine. • Please check whether the water inside the drum has been drained before opening its door.Please do not open the door if there is any water visible.
-
Page 8: Product Description
INSTALLATION Product Description Top cover Water supply hose Control panel Power supply cord Detergent dispenser Drum Door Service filter Drain hose Note! • The product line chart is for reference only, please refer to real product as standard. Accessories Transport Drain hose support Owner’s manual... -
Page 9: Installation
INSTALLATION Installation Installation area ！ Warning! • Stability is important to prevent the product from wandering! • Make sure that the product should not stand on the power cord. W> 20mm Before installing the machine, the location characterized follows shall be selected: 1.Rigid, dry, and level surface 2.Avoid direct sunlight 3.Sufficient ventilation... -
Page 10: Levelling The Washing Machine
INSTALLATION Levelling the washing machine ！ Warning! • The lock nuts on all four feet must be screwed tightly against the housing. Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions tighten the nuts. 2.Loosen the lock nut turn the feet until it closely contacts with the floor. -
Page 11: Drain Hose
INSTALLATION Connect the other end of inlet pipe to the inlet valve at the backside of product and fasten the pipe tightly clockwise. water supply hose water Inlet valve Drain Hose ！ ！ Warning! Warning! • Do not kink or protract the drain hose. •... -
Page 12: Operations
OPERATIONS Quick Start Caution! • Before washing, please make sure it’s installed properly. • Before washing at first time, the washing machine shall be operated in one round of the whole procedures without clothes in as follows. 1. Before Washing Main wash Softener... -
Page 13: Before Each Washing
OPERATIONS Before Each Washing • The working condition of the washer should be(0-40)°C.If used under 0°C,the inlet valve and draining system may be damaged. If the machine is placed under condition of 0°C or less, then it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen before use. -
Page 14: Detergent Dispenser
OPERATIONS Detergent Dispenser Pre wash detergent Main wash detergent Softener Dam-board Dam-board Liquid detergent Powder detergent Pull out the dispenser Caution! • Detergent only need to be added in "case I “after selecting pre-washing for machines with this function. Programme Programme Cotton Eco 40 °C Spin Only... -
Page 15: Control Panel
OPERATIONS Control Panel Model:E02 Press 3 sec. Press 3 sec. Drum Clean Model:E04 Note! • The chart is for reference only, Please refer to real product as standard. Start/Pause Product is switched off. Press the button to start or pause the washing cycle. -
Page 16: Other Functions
OPERATIONS Option Pre Wash The Prewash function can get an extra wash before main wash,it is suitable for washing the dust rises to surface of the clothes;You need to put detergent into the Case (I) when select it. Extra Rinse The laundry will undergo extra rinse once after you select it. - Page 17 OPERATIONS Child Lock To avoid mis operation by children. Extra Rinse Spin Press [Extra Rinse] and [No Spin] Power on Start 3 sec. till buzzer beep. Caution! • Press the two button 3sec. also to be released the function. • The “Child Lock” will lock all buttons except [OFF ]. •...
-
Page 18: Programmes
OPERATIONS Programmes Programmes are available according to the laundry type. Programmes Cotton Hard-wearing textiles, heat-resistant textiles made of cotton or linen. Synthetic Wash synthetic articles, for example: shirts, coats, blending. While washing the knitting textiles, detergent quantity shall be reduced due to its loose string construction and easily forming bubbles. -
Page 19: Washing Programmes Table
OPERATIONS Washing Programmes Table Programme Load(kg) Temp. Default Time (℃) 5.0/6.0 Default 50Hz 60Hz 1200 3:35 1:39 3:45 Cotton Eco 40 °C 3:52 2:40 3:19 Cotton Eco 60 °C Cold 1:35 1:35 1:35 Cotton 1:19 1:19 1:19 Cotton 20 °C 1:20 1:20 1:20... - Page 20 OPERATIONS Washing Programmes Table Programme Load(kg) Temp. Default Time (℃) Default 1200 1200 3:45 3:50 Cotton Eco 40 °C 3:23 3:20 Cotton Eco 60 °C Cold 1:35 1:35 Cotton 1:19 1:19 Cotton 20 °C 1:20 1:20 Cotton 30 °C 1:40 1:40 Cotton 40 °C 1:45...
-
Page 21: Maintenances
MAINTENANCES Cleaning And Care ！ Warning! • Before your maintenance starts, please unplug the machine and close the tap. Cleaning The Cabinet Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. - Page 22 MAINTENANCES Cleaning The Inlet Filter Note! • Inlet filter must be cleaned if there is less water. Washing the filter in the tap 1.Close the tap. 2.Remove the water supply hose from the tap. 3.clean the filter. 4.Reconnect the water supply hose Washing the filter in washing machine: Screw off the inlet pipe from the backside of the machine.
-
Page 23: Cleaning The Drain Pump Filter
MAINTENANCES Cleaning The Drain Pump Filter ！ Warning! • Be careful of the hot water! • Allow detergent solution to cool down. • Unplug the machine to avoid electrical shock before washing. • Drain pump filter can filter the yarns and small foreign matters from the washing. -
Page 24: Trouble Shooting
MAINTENANCES Trouble Shooting The start of the appliance does not work or it stops during operation. First try to find a solution to the problem, If not, contact the service centre. Description Reason Solution Washing machine Restart after the door is closed Door is not closed properly cannot start up Check if the clothes is stuck... -
Page 25: Technical Specifications
MAINTENANCES Technical Specifications Power Supply 220-240V~,50Hz MAX.Current 0.05MPa~1MPa Standard Water Pressure Dimension Washing Net Weight Rated Power Model Capacity (W*D*Hmm) MFE508 5.0kg 595*470*850 52kg 1950W 52kg 54kg MFE510 6.0kg 595*470*850 54kg 1950W MFE610 1950W (60Hz) MFE612 MFE712 7.0kg 595*495*850 61kg... -
Page 26: Product Fiches
MAINTENANCES Product Fiches MFE508 Model MFE510 Capacity Spin Speed 800/800/1000 rpm Energy efficiency class ❶ ❷ 169 kWh /annual Annual energy consumption Power consumption of off - mode 0.5W Power consumption of Left on -mode 1.0W Annual water consumption ❸... - Page 27 MAINTENANCES Model MFE610 MFE612 Capacity 1000/1000/1000/1200 rpm Spin Speed Energy efficiency class A ++ ❶ 173kWh /annual Annual energy consumption ❷ Power consumption of off - mode 0.5W Power consumption of Left on -mode 1.0W ❸ 9240L /annual Annual water consumption Spin- drying efficiency class ❹...
- Page 28 MAINTENANCES Model MFE712 Capacity 1200 rpm Spin Speed Energy efficiency class A ++ ❶ Annual energy consumption 197 kWh /annual ❷ 0.5W Power consumption of off - mode Power consumption of Left on -mode 1.0W 10000L /annual Annual water consumption ❸...
- Page 29 MAINTENANCES Model MFE812 Capacity 1200 rpm Spin Speed Energy efficiency class A +++ ❶ Annual energy consumption ❷ 196 kWh /annual 0.5W Power consumption of off - mode Power consumption of Left on -mode 1.0W ❸ 11000L /annual Annual water consumption ❹...
- Page 30 MAINTENANCES Note! • Programme setting for testing in accordance with applicable standard En60456. • When using the test programmes, wash the specified load using the maximum spin speed. • The actual parameters will depend on how the applicance is used,and maybe different with the parameters in above mentioned table.
Need help?
Do you have a question about the MFE508 and is the answer not in the manual?
Questions and answers