Configuration And Operation By Sms - Blow BL012 User Manual

Led indicator :
S olid blu e
F lashing blu e
B lue of f
Red on
Red of f

Configuration and Operation by SMS

1.To Set the Center Number
Command
: CENTER,000000,phone number#
NOTE
:The letters or symbols should be English and the letters should be in capital.
Example
:CENTER,000000,123456789#
※Using your mobile phone,send the above command to the phone number of the
device,it will reply: Center OK!
※To delete this number,you can send :CENTER,000000,0# to the phone number of the
device.
2.GPRS Setting
In order to use the GPRS function,the user needs to setup the APN by sending SMS
command.
--what is APN? Access Point name(APN) is the name used to identify a general packet
radio service (GPRS) bearer service in the GSM mobile network. The APN defines the
type of service that is provided in the packet data connection.
※Make sure that the SIM card in the tracker supports the GPRS function.
※The APN can be acquired from your local GSM operators.
Command
: APN,APN information,user name,password#
Note
:Some APN without user name and password,so please leave it blank.
For example
: APN,internet,123,456#
APN,internet#
when the device can not connect with the web platform or the APP.
※After sending the command,it will reply:APN OK!
SIM card inserted wrongly
S earching GPS signa l
S tart to work
C harging
F ull charging
(with the user name and password)
(without the user name and password) ※ please set it up
th e batter y