Switch On/Off, Pin Entry; Security; Charging The Battery; Enter Pin - Siemens A75 User Manual

right page (11)
of A75_Libra, fcc, us-en, (30.05.2005, 10:36)

Charging the battery

The battery is not supplied fully charged.
Plug the charger cable into the bottom of
the phone, plug the power supply unit
into a mains power socket and charge for
at least two hours.
Charging time
The charging time is 2 hours. Charging is
only possible within a temperature range
of +5°C to +40°C (+41°F to +104°F) If the
temperature rises/falls 5°C above/below
this, i.e drops to 32°F or rises to 113°F,
the charge symbol flashes a warning.

Switch on/off, PIN entry

Switch on/off
Press and hold On/Off/End key
switch on or off.

Enter PIN

The SIM card can be protected with a
4 - 8 digit PIN. Enter the PIN code using
the number keys (the display shows a se-
ries of asterisks, if you make a mistake
press ). Confirm your input with
§Clear§
Logging on to the network will take a few
seconds.
First time switching on phone, the time
and date must be set.

Standby mode

When the name of the service provider/
logo appears on the display, the phone is
in standby mode and ready for use.
Press and hold the On/Off/End key
return to standby mode from any menu
option.

Security

The phone and SIM card are protected
against misuse by several security codes.
Keep these confidential numbers in a safe
place where you can access them again if
required.
§Menu§
¢
Codes
PIN control
The PIN is usually requested each time
the phone is switched on. You can deacti-
vate this feature but you risk unauthor-
ised use of the phone. Some service pro-
viders do not permit deactivation of the
control.
Change PIN
You can change the PIN to any 4 - 8 digit
number you may find easier to remember.
Change PIN2
(Displayed only if PIN2 is available.)
Proceed as with
B
Change phonecode
to
You define and enter the phone code
(4 - 8 digits) when calling a phone code
protected function (e.g.
for the first time. It is then valid for all
protected functions. If it is entered incor-
rectly three times the phone is locked.
Contact the Siemens Service.
.
§OK§

Clear SIM card barring

If the PIN is entered incorrectly three
times, the SIM card is barred. Enter the
PUK (MASTER PIN) provided by your serv-
ice provider with the SIM card. If the PUK
(MASTER PIN) has been lost, please con-
tact your service provider.

Prevent accidental activation

B
Even if PIN use is deactivated con-
to
firmation is required to switch on the
phone. This prevents accidental activa-
tion of the phone, e.g. when you are
Switch on/off, PIN entry
¢ m ¢
Security
¢
Select a function.
Change PIN.
Direct
11
call, p. 13)