Portal Delete-User; Portal Domain - HP 3600 v2 Series Command Reference Manual

On the peer device (destination backup device), you must also add the corresponding service backup
interface in to portal group 1.

portal delete-user

Syntax
portal delete-user { ip-address | all | interface interface-type interface-number }
View
System view
Default level
2: System level
Parameters
ip-address: Logs off the user with the specified IP address.
all: Logs off all users.
interface interface-type interface-number: Logs off all users on the specified interface.
Description
Use the portal delete-user command to log off users.
Related commands: display portal user.
Examples
# Log out the user whose IP address is 1.1.1.1.
<Sysname> system-view
[Sysname] portal delete-user 1.1.1.1

portal domain

Syntax
portal domain domain-name
undo portal domain
View
VLAN interface, Layer 2 Ethernet interface view
Default level
2: System level
Parameters
domain-name: Specifies the ISP domain name, a case-insensitive string of 1 to 24 characters. The
domain specified by this argument must already exist.
Description
Use the portal domain command to specify an authentication domain for an interface. Then, the device
will use the authentication domain for authentication, authorization and accounting (AAA) of the portal
users on the interface.
Use the undo portal domain command to restore the default.
150