Page 1
GIGABIT SATA QUICK INSTALL GUIDE MODEL 503662 INT-503662 -QIG-0208-01...
Page 3
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS ™ Gigabit SATA NAS, Model 503662. This Quick Install Guide presents the rudimentary steps required to set up and operate this device. For specifications and more detailed instructions, refer to the user manual 1) on the CD enclosed with this product; 2) on the Web site listed below;...
Page 4
Package Contents Before you start to install and operate this NAS device, make sure the following items are enclosed; otherwise, contact your dealer for assistance. • Gigabit SATA NAS • A/C power adapter • Quick installation guide & user manual CDROM Installation 1.
Page 5
e) Once removed, you can find a bag holding screws and rubber feet. You can use them after the installation to secure the housing. This is optional. f) Slide in the HDD into the HDD cover and place the HDD cover in the drive bay of the SATA NAS SATA HDD HDD cover...
Page 6
2. Cable connection a) Connect the included Ethernet cable to the back of the Gigabit SATA NAS. Connect the other end of the Ethernet cable to a LAN switch or Router on your network. Ideally, a DHCP server is installed installed on your network which provides an IP Address to the Gigabit SATA NAS.
Page 7
Alternatively, you can use the NAS Finder application from the included Software CD. NAS Finder is designed to detect all NAS devices on your network. Your NAS unit should be listed with the unit’s IP address. Double-click the device name or highlight the device name and click on the ‘Configure’...
Need help?
Do you have a question about the 503662 and is the answer not in the manual?
Questions and answers