Table of Contents
Advertisement
14
NOTE: When upgrading the firmware, remove all cables and other
USB devices.
NOTE: To utilize the Mirroring Display function (optional), make
sure you have updated the firmware to the latest version from
www.acer.com, and use the acer USB WiFi adapter.
•
OTA (Over-the-air)
1
Connect a USB wireless adapter (optional) or a RJ45 cable to the projector.
(Make sure it connects to the internet.)
2
Select "LAN/WiFi" or "eDisplayPro" mode via the OSD menu.
3
The projector will automatically search for the latest firmware version
available.
4
Select YES when the projector pops out a message to remind you that
there is a new firmware version for you (by Acer eDisplayPro app remote).
5
Do not turn off the projector while the firmware is updating.
Advertisement
Table of Contents
