Using Ping, Tracert, And System Debugging; Ping; Using A Ping Command To Test Network Connectivity; Ping Example - HP MSR Series Configuration Manual

Msr router series network management and monitoring
Hide thumbs Also See for MSR Series:
Table of Contents

Advertisement

Using ping, tracert, and system debugging

Use the ping, tracert, and system debugging utilities to test network connectivity and identify network
problems.

Ping

The ping utility sends ICMP echo requests (ECHO-REQUEST) to the destination device. Upon receiving
the requests, the destination device responds with ICMP echo replies (ECHO-REPLY) to the source device.
The source device outputs statistics about the ping operation, including the number of packets sent,
number of echo replies received, and the round-trip time. You can measure the network performance by
analyzing these statistics.

Using a ping command to test network connectivity

Execute ping commands in any view.
Task
Test the network
connectivity to an IP
address.
For more information about the ping ipx command, see IPX Command Reference.
For more information about the ping lsp command, see MPLS Command Reference.

Ping example

Network requirements
Test the network connectivity between Device A and Device C in
get detailed information about routes from Device A to Device C.
Command
For
an
IPv4
ping [ ip ] [ -a source-ip | -c count | -f |
-h ttl | -i interface-type interface-number
| -m interval | -n | -p pad | -q | -r | -s
packet-size | -t timeout | -tos tos | -v |
-vpn-instance vpn-instance-name ] * host
For an IPv6 network:
ping ipv6 [ -a source-ipv6 | -c count | -m
interval | -s packet-size | -t timeout |
-vpn-instance vpn-instance-name ] * host
[ -i interface-type interface-number ]
200
Remarks
Set a larger value for the timeout timer
network:
(indicated by the -t parameter in the
command) when you configure the
ping command for a low-speed
network.
Only the directly connected segment
address can be pinged if the outgoing
interface is specified with the -i
keyword.
Disabling the echo reply function on
the firewall installed on the destination
affects the ping function.
Figure
62. If they can reach each other,

Advertisement

Table of Contents
loading

Table of Contents