Laminating; Removing A Jammed Laminating Pouch - ALDI script OL 250-Q125 User Manual

GB IRE
Operation

Laminating

1. Move the ON/OFF switch
The ready indicator will turn from dark blue to red within the next 1 ½–2 minutes.
2. Once the ready indicator
the laminating pouch
Make sure that the document is flush with and aligned as close as possible to the
sealed edge of the laminating pouch.
3. Insert the laminating pouch so that it is centred and with the closed-edge first into
the laminating pouch infeed slot
The heating rollers will automatically pull the laminating pouch in and move it to
the laminating pouch output slot
to pull out the laminating pouch.
4. Remove the laminating pouch and let it cool off briefly on a flat surface.
• If necessary, you can cut off excessive material after it has cooled
off.
• Repeat the process if the laminating pouch has not adequately
adhered to the document.
5. Move the ON/OFF switch to "OFF" (

Removing a jammed laminating pouch

The laminator is equipped with an antiblocking system. If the laminating pouch was
not inserted straight or it becomes jammed in the laminator, proceed as follows:
1. Move the ABS switch
down.
2. Pull the laminating pouch
It is recommended you pull the laminating pouch out in the direction of
its larger end.
You can place the document in a new laminating pouch and laminate it again.
14
www.monolith-support.com
4
to "ON" (―).
1
is red, place the document between the two sides of
6
.
2
on the back of the laminator.
5 on the front of the laminator. Don't use force
) to switch the laminator off.
AAAAA
towards the laminating pouch infeed slot
7
6
out of the laminator.
A4 Laminator
and hold it
2
AFTER SALES SUPPORT
00 800 79 333 900
GB IRE