Table of Contents
Advertisement
Predefined user roles
network-admin
Parameters
hex-value: Sets a hexadecimal TPID value in the range of 0x0001 to 0xFFFF, excluding the reserved
EtherType values listed in
Table 55 Reserved EtherType values
Protocol type
ARP
PUP
RARP
IP
IPv6
PPPoE
MPLS
IPX/SPX
IS-IS
LACP
802.1X
LLDP
802.1ag
Cluster
Reserved
Usage guidelines
A QinQ-enabled port uses the CLAN TPID to match incoming tagged frames. An incoming frame is
handled as an untagged frame if its TPID is different from the CVLAN TPID.
Examples
# Set the TPID value in CVLAN tags to 0x8200.
<Sysname> system-view
[Sysname] qinq ethernet-type customer-tag 8200
qinq ethernet-type service-tag
Use qinq ethernet-type service-tag to configure the SVLAN TPID.
Use undo qinq ethernet-type service-tag to restore the default SVLAN TPID.
Syntax
qinq ethernet-type service-tag hex-value
undo qinq ethernet-type service-tag
Default
The SVLAN TPID is 0x8100.
Table
55.
Value
0x0806
0x0200
0x8035
0x0800
0x86DD
0x8863/0x8864
0x8847/0x8848
0x8137
0x8000
0x8809
0x888E
0x88CC
0x8902
0x88A7
0xFFFD/0xFFFE/0xFFFF
243
Advertisement
Table of Contents
