Table of Contents
Advertisement
Each power supply has a status LED that indicates whether power is present or whether a power fault has
occurred. The status LED is located to the left of the red latch lever.
LED State
Off
Steady green
Accelerator card monitoring
The LEDs on an Accelerator card indicate when there is a problem with the card. If an Accelerator card fails,
contact Customer Support to have it replaced.
An Accelerator card has two LEDs:
•
LED 1 solid green or yellow or flashes green or yellow.
•
LED 2 solid green or red or flashes green or red.
Server state
LED 1
Power up
Off
Off
Description
System off or power supply failed
Normal operation
LED 2
Description
PCIe 12 V power is not present.
Off
Configuration Programmable Logic Device
Solid red
(CPLD) detected power failure or CPLD is
not configured.
Chapter 4: Server troubleshooting
25
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SimpliVity 380 Gen9 and is the answer not in the manual?
Questions and answers