Wheel And Tire Torque Specifications; Torque Specifications - Chrysler PACIFICA 2018 User Manual

WHEEL AND TIRE
TORQUE
SPECIFICATIONS
Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to the
vehicle. Any time a wheel has been removed and
reinstalled on the vehicle, the lug nuts/bolts should
be torqued using a properly calibrated torque
wrench using a high quality six sided (hex) deep wall
socket.

Torque Specifications

Lug Nut/Bolt **Lug Nut/
Torque Bolt Size
100 Ft-Lbs
M12 x 1.5
(135 N·m)
**Use only your authorized dealer recommended
lug nuts/bolts and clean or remove any dirt or oil
before tightening.
238
Inspect the wheel mounting surface prior to mount-
ing the tire and remove any corrosion or loose
particles.
Tighten the lug nuts/bolts in a star pattern until each
nut/bolt has been tightened twice. Ensure that the
socket is fully engaged on the lug nut/bolt (do not
insert it halfway).
Lug Nut/Bolt
Socket Size
19 mm
Torque Pattern
After 25 miles (40 km) check the lug nut/bolt
torque to be sure that all the lug nuts/bolts are
properly seated against the wheel.
WARNING!
To avoid the risk of forcing the vehicle off the
jack, do not tighten the lug nuts fully until the
vehicle has been lowered. Failure to follow this
warning may result in personal injury.