Software Update Using The Tma (Thranelink Management Application) - COBHAM SAILOR 6280 Installation Manual

Maintenance
6.2.3 Software update using the TMA (ThraneLINK Management
Application)
1. Download the TMA from the Cobham eSupport web site (Self-Service Center, SSC. You
find the SSC in the Service and Support section, 24-7 Service). Make sure to use version
1.03 or higher.
2. Make sure that your PC is on the same network as the SAILOR 6282 AIS Transponder.
3. Make sure that the SAILOR 6004 Control Panel is switched on.
4. Connect your PC to a free LAN interface of the SAILOR 6282 AIS Transponder.
5. Start the TMA on your PC. The SAILOR 6282 AIS Transponder is automatically detected.
Click the icon for the SAILOR 6282 AIS Transponder. The Software Download Status
must show Ready.
6. The icon Software update pulsates yellow when a new software version is detected
for the SAILOR 6282 AIS Transponder.
The TMA searches all devices connected via USB for new software. You can add an
additional search path. To do so press the icon Option on the software update screen
and select Search for software. A dialog box is displayed and you can select a
directory.
7. To start the software update click the icon Software update and select Update. The
current and the new software version numbers are displayed.
You can also select a specific software version. To do so press the icon Option on the
software update screen and select Select software. A list of available software
versions is displayed. Select one and click the button Update.
6-2
VHF/GPS GPS
Figure 6-2: LAN connectors of the SAILOR 6282 AIS Transponder
Chapter 6: Service & maintenance
12-24V DC FUSE SUB-D50
1
98-137573-A