Page 2
INTRODUCTION Thank you for purchasing the VTech Pop-a-Balls™ Push & Pop ® Bulldozer . The bulldozer comes to life when the colorful balls are dropped into the cab of the bulldozer. Load the balls and push the bulldozer to see the balls pop up through the smoke stack, into the scoop bucket and back again.
INCLUDED IN THIS PACKAGE • One Push & Pop Bulldozer • Four balls • One handle • Two large plugs • Four small screws • One parent’s guide WARNING: All packing materials, such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety.
Unlock the packaging locks: Rotate the packaging locks 90 degrees counter-clockwise. Pull out the packaging locks. GETTING STARTED BATTERY INSTALLATION 1. Make sure the unit is turned OFF. 2. Locate the battery cover on the back of the bulldozer. Use a screwdriver to loosen the screw.
• Remove batteries during long periods of non-use. • Do not dispose of batteries in fire. • Do not charge non-rechargeable batteries. • Remove rechargeable batteries from the toy before charging (if removable). • Rechargeable batteries are only to be charged under adult supervision.
2. Automatic Shut Off To preserve battery life, the Push & Pop Bulldozer™ will automatically power down after approximately 30 seconds without input. The unit can be turned on again by pressing any button or twisting the tire gear. NOTE: If the unit repeatedly powers down, we suggest changing the batteries.
4. Smoke Stack Drop a ball into the Smoke Stack to hear fun sounds. The light will flash with the sounds. 5. Tire Gear Twist the Tire Gear to the left then release to manually pop the balls out of the Smoke Stack.
MELODY LIST 1. I’ve Been Working on the Railroad 2. Row, Row, Row Your Boat 3. Swing Low, Sweet Chariot 4. Turkey in the Straw 5. When the Saints Go Marching In 6. One Man Went to Mow a Meadow 7.
Page 9
IMPORTANT NOTE: Creating and developing VTech ® products is accompanied by a responsibility that we at VTech ® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur.
Page 10
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Return of the product under Warranty must adhere to the following rules: If VTech believes that there may be a defect in the materials or workmanship of the product and can confirm the purchase date and location of the product, we will at our discretion replace the product with a new unit or product of comparable value.
Need help?
Do you have a question about the Pop-a-Balls Push & Pop Bulldozer and is the answer not in the manual?
Questions and answers