Advertisement
Wall
Note: The repeater should be used with Yealink original USB
power adapter (5V/0.6A) and
the USB cable only. The use
of the third-party USB power adapter or USB cable may
cause the damage to the repeater.
Introduction
Yealink DECT repeater RT20U is designed in
accordance with Digital Enhanced Cordless
Telecommunication (DECT) standard. It can be
deployed to extend the range of the Yealink IP DECT
phone (e.g., W52P, W56P) to cover areas where
reception was previously not available. All the usual
handset functions are supported by the base station
in the extended radio range.
The repeater, base station and cordless handset
employ wireless connection. Signals are exchanged
without acoustical and visual differences.
DECT Repeater RT20U User Guide
3
Multiple Repeaters
Up to 5 repeaters can be registered to one base station to extend available
reception range for all registered handsets. All repeaters must be installed
within the base station coverage area (up to 300m in unobstructed
outdoor areas and up to 50m inside buildings), as shown in the figure
below. It is not possible to install the repeaters in series or "daisy-chain".
If the DECT link quality of RT20U is in excellent-to-good condition, you can
register up to 5 handsets to your base station and the base station can
handle a maximum of 4 calls at one time.
www.yealink.com
Advertisement
