Running The Example Design - Xilinx HDMI 1.4 Product Manual

• AUD_PAT_GEN (Custom IP)
• HDMI_ACR_CTRL (Custom IP)

Running the Example Design

1. Open the Vivado Design Suite and create a new project.
2. In the pop-up window, press Next until you get to the page to select Xilinx® part or
board for the project.
X-Ref Target - Figure 5-7
3. Select the Board. (KC705, KCU105, ZC706, and ZCU102 are supported.)
4. Click Finish.
5. Click IP Catalog and select HDMI 1.4/2.0 Transmitter Subsystem under Video
Connectivity, then double click on it.
For the Example Design flow, Native Video Interface is not supported.
°
HDMI 1.4/2.0 TX Subsystem
PG235 October 4, 2017 www.xilinx.com
Chapter 5: Example Design
Send Feedback
66