Usage Of Operation Key; Operation/Stop Key - UNI-T UTD2025C Operating Manual

Operating Manual for UTD2000/3000

Usage of operation key

RUN/STOP key is in upper right corner of front
panel of digital storage oscillograph. User can
press the key so that green lamp is on to show
operation status. Red lamp can be on after pressing
the key to show stop status.
Figure 2-30 Operation/stop key
Automatic setup
As shown in above figure, automatic setup is to
simplify operation. Digital storage oscillograph can
adjust vertical deflection coefficient and horizontal
time base gear automatically for stable waveform
display on the screen according to waveform
amplitude and frequency when user presses AUTO
key. System setup is shown in following form during
automatic setup:
70