Overview Of Appliance; Assembling The Stand - UNITED UTF-673 Instruction Manual

1. Air outlet grating
2. Motor
3. Timer
4. Speed
5. Mode
6. Oscillation
7. ON/OFF
8. Power plug
9. Stand
10. Screws
11. Remote control
1. Take all of the appliance parts out of the packaging and remove
all packaging materials and inserts.
2. Turn the fan upside down so that you can look at the motor (2). (Fig.
1).
• Put the part of the stand (9) that has no plug connections on the
straight side onto the motor (2). Make sure that the power cord (8) is
not wedged in. (see. Fig. 2)
•
Now put the second part of the stand (9) onto the motor (2) and
the part of the stand (9) that has already been mounted. The
power cord (8) must now be threaded through the middle of the
stand (9) and guided through the cord holders. (See Fig. 3).
•
Secure the stand (9) with the screws (10). Tighten the screws (10)
with a suitable screwdriver. (See Fig. 4).

OVERVIEW OF APPLIANCE

ASSEMBLING THE STAND