Custom User Settings - Avidyne IFD540 Pilot's Manual

User Option Item Title
Ψ - not available if the option is not enabled in the IFD.

CUSTOM USER SETTINGS

5 different custom user definitions can be created which are
saved across power cycles. Each custom user definition consists
of:
• User Option page selections;
• Map settings;
• FMS settings;
• Datablock selections.
To select the desired User ID, use the outer ring of the bottom
right IFD knob to select the "User ID" row on the User Options
page from the AUX-Setup tab and then twist the inner ring of that
knob to cycle through the 5 different user ID definition sets. No
further action is required to select the desired user ID.
Setting/Selecting User ID
Each user ID can be uniquely named, if desired, with a maximum
of 11 characters. To create a custom name for a user ID, use the
outer and inner ring to select the User ID row and the specific ID
that is desired to be renamed. Then push the bottom right IFD
knob in to generate a keyboard. Type in the desired name (do
not use any spaces) and press the ENTER key on the keyboard
or the ENTR button on the bezel.
4-50 AUX Pages
Description
10 or 15 seconds – the page tabs
"sink" down out of view x seconds
after they were last used.