Install Easyprint 3D App; Bind Printer To Easyprint 3D App - Geeetech E180 User Manual

EasyPrint 3D App only supports Android system so far. IOS system is under developing.
Please stay tuned.

7.1 Install EasyPrint 3D APP

Download the EasyPrint 3D APP here and install the EasyPrint 3D APP.
www.geeetech.com/firmware/EasyPrint3D_Android.apk
Once finishing installation, enter My Center to register and log in.
Note: As the EasyPrint 3D APP is continuously upgraded, some UI and workflow may
be different, please follow the APP.

7.2 Bind printer to EasyPrint 3D App

Log in and bind the printer. In My Center
following the instructions on App.
—
My 3D Printer, finish the binding process
31