Switching To Remote Control - R&S RTM2022 User Manual

®
R&S RTM2000
in the network environment settings or in the "Setup" menu under "Interface > Parame-
ter". For remote control, addresses 0 through 30 are allowed. The GPIB address is
maintained after a reset of the instrument settings.

17.4 Switching to Remote Control

When you switch on the instrument, it is always in manual operation state ("local"
state) and can be operated via the front panel.
When you send a command from the control computer, it is received and executed by
the R&S RTM. The display remains on, manual operation via the front panel is always
possible.
User Manual 1317.4726.02 ─ 10
Network and Remote Operation
Switching to Remote Control
403