Related Manuals for US Steam Sea Hawk
Summary of Contents for US Steam Sea Hawk
- Page 1 Sea Hawk User Manual US Steam 7940 Rodeo Trail Suite 360 Mansfield, Texas 76063...
-
Page 2: Table Of Contents
Descaling ________________________________________________________ Notices __________________________________________________________ Warranty & Repair _________________________________________________ Congratulations on your purchase of the US Steam Sea Hawk system. The Sea Hawk not only combines a steam, extraction, and vacuum cleaner into one system, but it included our patented RAIN SYSTEM™. -
Page 3: Components
Components Carry Handle Extraction Bottle Steam Pressure Connector Control Vacuum Speed ON/OFF Control Technical Data: Steam Pressure: 4.5 Bars Air flow: 22 liters/second Boiler Volume: .81 Liters Boiler Capacity: .4 Liters Recovery Tank Volume: 1.2 Liters Extraction Bottle HEPA Filter Vacuum Collection Tank Steam Reservior... - Page 4 Vacuum & Steam Controls Steam Controls Vacuum Controls Steam Pressure Control Increase Decrease Vacuum Power ON/OFF ON/OFF Low Water Max Speed Steam Light Medium (soliid when ready) Vacuum Collection Tank is FULL Stand by Mode Ø Most cleaning jobs can be Ø...
-
Page 5: Quick Start
Ø The Sea Hawk should be the only appliance plugged into the power outlet. Ø Use only a 12 gauge / 15AMP rated or higher extension cord. Ø It will take 10 minutes for the Sea Hawk to heat and be ready for use. ON/OFF Ø... - Page 6 Ø When your Sea Hawk needs refilling, the low water light comes on and steamer starts beeping. Ø Turn off the Sea Hawk and refill the steam reservior tank. Push power button to restart your Sea Hawk and resume heating.
-
Page 7: Shut Down
Shut Down ① Push ON/OFF button on Sea Hawk. ② Clean vacuum collection Tank Remove the collection tank and drain contents from the vacuum reservoir and steam reservoir tank. Clean the tank and remove the yellow nebulizers for additional cleaning. Rise with hot water until all residue and stains on the tank wall have been removed. -
Page 8: Trouble Shooting
Ø Is the steam control adjustment knob turned to the closed position? Water coming out of hose while Ø Make sure the Steam Button and hose handle buttons are in the OFF the unit is heating up. position. No response from buttons on Ø Check hose connections. hose handle Ø Try disconnecting the hose and reconnecting. Ø The boiler pulled all the water from the steam reservoir tank. During the warm-up phase the Ø Refill the steam reservoir tank. Sea Hawk’s alarm goes off. Ø Push the ON/OF button on the console to reset. Ø Empty and replace water in vacuum collection tank. Ø Check the HEPPA filter and clean if necessary. Ø Check the hose and accessory connections. Vacuum Power is insufficient Ø The seal around the water tank is not positioned correctly. Ø Check the hose and accessories for particle blockage. The hose or accessories have an Ø Dirt has accumulated in the hose or filter. Clean both and reinsert. unpleasant odor. - Page 9 Accessories Extension Wands Nylon Brush Hose Handle Extraction Bottle Part # Part # Part # Part # ______________________________________________________ Hard floors (wood, tile) Rubber Insert Part # Carpets and rugs Rectangular Brush Part # Carpet Insert Part # ______________________________________________________ Triangle Brush Part # Jett Nozzle Suction Nozzle Part #...
- Page 10 Extraction Accessories NO ATTACHMENT Carpet, Upholstery, and mattress Glass, windows, and mirrors Rubber tip with brush Part # All hardwood surfaces Rubber tip Part # Small Extraction Nozzle Part # Pre-Cleaning in heavy soiled area Nylon Brush Part # _____________________________________________________ NO ATTACHMENT Carpet, Upholstery, and mattress Glass, windows, and mirrors...
-
Page 11: Maintenance
② Clean vacuum hose by activating the vacuum mode and suck water through the hose. ③ Clean the exterior of the Sea Hawk with wet cloth. Do not use solvents or detergents that could damage the plastic surface. ④ Clean Vacuum Collection Tank Remove the tank and drain water from the vacuum and reservoir and tanks. - Page 12 Check the O-rings on the connector for damage: You can order a suitable set of O-rings from our online shop at www.beam.de or by telephone on +49 (0)8337-7400-21. the bottom of the Sea Hawk. Item no.: 96300 Pos(3): 2 O-rings on the brass spout Ø...
-
Page 13: Descaling
DESCALING THE BOILER AND ELECTRONIC SENSOR Ø ONCE PER YEAR To extend the life of your Sea Hawk, we recommend descaling the boiler and the electronic sensor. After prolong periods of activity, lime scale deposits make the boilers of most steam appliances unusable. Your Sea Hawk comes with an exclusive technology allows you to clean and inspect the electronic sensors that monitor the boiler water levels. -
Page 14: Notices
Notices Read all instructions before using this steam cleaner. WARNING: STEAM GENERATED BY THE BLUE EVOLUTION IS EXTREMLY HOT AND WILL CAUSE INJURY IF IT COMES IN CONTACT WITH THE SKIN OR EYES. USE AS DIRECTED BY THE MANUAL AND ONLY AIM THE STEAM HANDLE AT THE CLEANING AREA. - Page 15 US Steam’s responsibility is limited to repair, replacement, credit or refund, any of which may be selected by US Steam at its sole discretion. The Warranty does not cover defects or damage arising from the disassembly or attempted disassembly of your steamer.
- Page 16 Floors, Kitchen, Grills, & Bathrooms Restaurant The Blue Evolution will clean every area of your restaurant without chemicals. Patient Beds, Wheel Chairs, & Curtains Hospital Steam is a proven killer of virus and infection causing germs. UV-C reduces airborne bacteria. Deli’s, Freezers &...
Need help?
Do you have a question about the Sea Hawk and is the answer not in the manual?
Questions and answers