Motorola SVG2500 User Manual page 37

Hide thumbs Also See for SVG2500:

This document is uncontrolled pending incorporation in PDM

2 INSTALLATION

8. Using a screwdriver, turn each screw until part of it protrudes from the wall, as

shown in the following illustration.

There must be .09 inches (2.3 mm) between the wall and the underside of the

screw head.

9. Place the SVG2500 so the keyholes on the back of the unit are aligned above the

mounting screws. Be sure you do not damage the antennas.

10. Slide the SVG2500 down until it stops against the top of the keyhole opening.

Wall Mounting Template

You can print this page to use as a wall mounting template.

Be sure you print it at 100% scale. In Acrobat Reader, be sure that Fit To Page is not

selected in the Print dialog box.

Measure the printed template with a ruler to ensure that it is the correct size.

Revised drawing under

construction.