Siemens hipath 1100 Service Manual page 227

For internal distribution only
External line used (Ln)
●
Note: Example of the (Ln) field content for ticketing:
Extension (Ext)
●
Some specific types of access will be displayed in this field, indicated by the follow-
ing numbers:
Sensor - Outgoing call
Data Link - Outgoing or incoming data call for system administration
DISA - Incoming call
Fax/DID - Incoming call
COS Changeover (WCOS)
●
Ring duration
●
Call duration
●
Dialed Number (Number)
●
The system allows you to configure a confidentiality feature for the number di-
aled at the time the CDR record is issued. This is done by replacing the symbol
"?" with the last four digits dialed.
Type of call (I):
●
– 1 = Incoming call
– 2 = Outgoing call
– 5 = Transferred incoming call
– 6 = Transferred outgoing call
– 7 = 3-way conference with incoming
– 8 = 3-way conference with outgoing call
– * = Incoming call not answered yet = incoming call
Impulses (Call fees) with a TME1 Module installed.
●
Cost Code (Account code).
●
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
Configuring the System Specifically for the Client
Comments about the System's Programming Codes
External Line
801
802
Access
(Ln) Field
00
01
(Ext) Field
9101
9201
9301
9401
7-43