Rikon Power Tools 10-321 Owner's Manual
  1. Manuals
  2. Brands
  3. Rikon Power Tools Manuals
  4. Saw
  5. 10-321
  6. Owner's manual

Rikon Power Tools 10-321 Owner's Manual

14” bandsaw w/open stand
Hide thumbs
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

14" Bandsaw w/Open Stand
Model: 10-321
Shown with optional Mobility Kit
Model # 13-321
Record the serial number and date of purchase
in your manual for future reference.
Serial number:
Date of purchase:
For more information:
www.rikontools.com
info@rikontools.com
or
For Parts or Questions:
techsupport@rikontools.com
877-884-5167
or
Part #10-321M1

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 10-321 and is the answer not in the manual?

Questions and answers

Related Manuals for Rikon Power Tools 10-321

Summary of Contents for Rikon Power Tools 10-321

  • Page 1 14” Bandsaw w/Open Stand Model: 10-321 Shown with optional Mobility Kit Model # 13-321 Record the serial number and date of purchase in your manual for future reference. Serial number: Date of purchase: For more information: www.rikontools.com info@rikontools.com For Parts or Questions: techsupport@rikontools.com...

  • Page 2: Safety Warnings

    Operator Safety: Required Reading IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following instructions must be followed at all times. There are certain applications for which this tool was designed. We strongly recommend that this tool not be modified and/ or used for any other application other than that for which it was designed.

  • Page 3: California Proposition 65 Warning

    ALWAYS DISCONNECT TOOLS. Disconnect tools before servicing and when changing accessories such as blades, bits, and cutters. ALWAYS AVOID ACCIDENTAL STARTING. Make sure switch is in “OFF” position before plugging in cord. NEVER LEAVE TOOLS RUNNING UNATTENDED. ALWAYS CHECK FOR DAMAGED PARTS. Before initial or continual use of the tool, a guard or other part that is damaged should be checked to assure that it will operate properly and perform its intended function.

  • Page 4: Table Of Contents

    Table of Contents Safety Warnings..............................2 -3 Bandsaw Safety Rules ..........................3 Specifications ............................4 Contents of Package ..........................5 Loose Parts ............................6 Getting To Know Your Bandsaw ......................7 Table Assembly .............................8 Rip Fence Assembly ..........................8 Hand-Wheel Assembly .........................8 Setting 90 Table Stop ...........................9 Tilting the Table .............................9 Tracking Blade ............................10 Adjusting Blade Tension ........................10...
  • Page 5 Hex Nut M6.............2 UNPACKING AND CHECKING CONTENTS Hex Bolt M8x45..........1 Model 10-321 14” Band Saw is shipped complete in one box. Hex Nut M8.............1 A. Separate all parts from carton and check each item with Carton Contents list below to make sure all items are accounted for, before Wing nut M6.............1...

  • Page 6: Description

    3. INITIAL ASSEMBLY The 10-321 band saw is supplied partly assembled. Prior to use, the following items have to be assembled: Open Stand, 2-1/2” Dust Port, Table, Blade Tension Knob, Tool Holder, and Crank Handle. WARNING: To avoid injury, do not attempt to run or use this machine until all parts are assembled and working properly.

  • Page 7: 2-1/2" Dust Port

    E. Locate four hex bolts and four lock washers from the bag of loose I. Assemble the tool holder to the column of the band saw with two parts used to mount the table. Mount the table to the upper table pan head screws.
  • Page 8 KNOW YOUR BAND SAW Blade Tension Knob Blade Tension Door Locking Knob Indicator Blade Tracking Knob Upper Bandwheel Door Tool Holder Guide Post Adjusting Knob Blade Guides Table Insert Switch Upper Table Trunnion Lower Bandwheel Table Lower Table Trunnion Motor Door 2-1/2”...

  • Page 9: Tilting The Table

    3. SETTING TABLE SQUARE BACK OF BLADE 6. CHANGING AND ADJUSTING THE SAW BLADE Place a square against the back (non-tooth) side of the saw blade. If This band saw is factory-equipped with a general-purpose wood you fi nd that the table runs up hill or down hill as you feed the cutting blade, the saw blade is set prior to delivery.
  • Page 10 8. SETTING THE CUTTING HEIGHT The Lower Blade Guide A. To adjust the lower blade guides, fi rst position the right and left A. The upper blade guide should be set as close as practical against roller guides relative to the blade by loosening the lock nut (FIG. 21) the work piece.
  • Page 11 13. DRIVE BELT POSITIONS HIGH/LOW SPEED For the low speed 1620 ft/min, fi t the belt to the front pulley on For the high speed 3340 ft/min, the belt should be fi tted to the both the motor and bandwheel. (See FIG. 23) rear pulley on both the motor and bandwheel.

  • Page 12: Operation

    OPERATION WARNING: Before starting check if any part of your band saw is FIG. 26 Blade missing, malfunctioning, has been damaged or broken, such as the motor switch, or other operation control, a safety device or the power Correct cord, turn the band saw off and unplug it until the particular part is properly repaired or replaced.

  • Page 13: Operation

    MAINTENANCE WARNING: To avoid injury due to unexpected starting, before FIG. 29 cleaning or carrying out maintenance work, switch off and disconnect the band saw from the power source. Never use water or other liquids to clean the band saw. Use a dry brush.

  • Page 14: Troubleshooting

    TROUBLESHOOTING Problem Diagnosis Remedy The machine does not work when switched 1. No power supply. 1. Check the cable for breakage. 2. Defective switch. 2. Replace the lock switch. 3 Defective motor. 3. Defective motor. The saw blade does not move with the 1.
  • Page 15 PARTS DIAGRAM A PARTS LIST A DESCRIPTION KEY NO. MFG. PART NO. Front beam 1-JL21050004-001Z Side beam 1-JL21050005-001Z 1-JL21050001-001Z Side panel 1-JL21050003-001Z Front panel 1-JL21050002-001Z Hex nut 1-NUT5/16B Washer 1-WSH8GB97D1B Hex bolt 1-NEC5/16X5/8B Washer 1-WSH6GB96B Hex nut 1-NUT1/4B Hex bolt 1-HEX1/4X1 1/2B Rubber shoe 1-JL40060005...
  • Page 16 PARTS DIAGRAM B 10 11...
  • Page 17 PARTS LIST B KEY NO. MFG. PART NO. DESCRIPTION 1-JL21010001A-001S Top plug 1-JL21011000R050W Frame 1-JL20010008 Leaf spring 1-RVT4X8GB12618A Rivet 1-M6GB889Z Lock nut M6 1-JL26010007 Bushing 1-M6X25GB70Z Hex socket screw M6X25 1-M6GB889Z Lock nut M6 1-JL26010006-001S Door locking knob 1-M6X22GB70Z Hex Bolt M6X25 1-M20GB6173Z Hex Nut M20 1-JL21012000J-049W...
  • Page 18 PARTS DIAGRAM C...

  • Page 19: Crank Handle

    PARTS LIST C KEY NO. DESCRIPTION MFG. PART NO. 1-JL28020004 Bushing 1-JL21020001K Saw blade 1-JL21022001A Upper wheel 1-CLP40GB893D1B Retaining ring 40 1-BRG6203-2Z-P5GB276 Bearing 1-JL21022002A Tire 1-JL21023002C Lower wheel 1-JL20020002 Drive belt 1-JL20014002A Tension wheel 1-BRG6001-2RSGB276 Bearing 1-CLP28GB893D1B Retaing ring 28 1-CLP12GB894D1B Retaing ring 12 1-JL20014001...
  • Page 20 PARTS DIAGRAM D...

  • Page 21: Description

    PARTS LIST D KEY NO. MFG. PART NO. DESCRIPTION 1-JL20030001A Lower table trunion 1-M8GB6177B Flange nut M8 1-M8X20GB14Z Carriage bolt M8x20 1-JL20030004 Turnning label 1-ST3D5X9D5GB845Z Tapping screw 3.5x9.5 1-1506003 Pointer 1-JL22020002-001S Knob 1-JL21031003 Tube 1-M8X20GB5783Z Hex bolt 1-WSH8GB93Z Spring washer 1-WSH8GB96Z Washer 1-WSH6GB97D1Z...
  • Page 22 PARTS DIAGRAM E...
  • Page 23 PARTS LIST E KEY NO. MFG. PART NO. DESCRIPTION 1-WSH8GB93Z Spring washer Hex Nut M16 1-M16GB6171Z 1-WSH16GB93Z Spring washer 16 Wheel carrier bracket 1-JL20021005A001Z 1-JL20021006D Upper bearing bolt Star lock 1-JL20021004 1-JL20021002 Mount shaft Adjusting knob cap 1-JL20024001-001S 1-JL20024002-001S Adjusting knob body Hex Bolt M8x70 1-M8X70GB5781Z 1-JL21025000-001S...
  • Page 24 PARTS DIAGRAM F...

  • Page 25: Washer 6

    PARTS LIST F KEY NO. MFG. PART NO. DESCRIPTION Upper guide body 1-JL21042001 1-JL21042002 Upper guide mount Carriage bolt M8x20 1-LOC5/16Z 1-WSH8GB97D1Z Washer 8 Hex nut 1-NEC5/16X7/8 1-JL22041004 Special washer Upper guide shaft 1-JL22042002 1-M6X10GB80B Hex Socket set screw M6x10 Hex Bolt M6x16 1-M6X16GB5783B 1-M6GB6170Z...
  • Page 26 NOTES...

  • Page 27: Las Instrucciones De Seguridad

    Lista de Contenido Garantía......................................26 Las instrucciones de seguridad..........................26-27 Especificationes..............................27 Asamblea.......................................28-30 Conocer a su banda Vio...................................31 Ajuste......................................31-34 Operación........................................35 Mantenimiento................................36 Esquema Eléctrico....................................36 Localizador de Averías..................................37 Reparar los Acuerdos de Protección..............................37 Partes Diagramas................................38-48 Plena GARANTÍA DE UN AÑO Durante un año a partir de la fecha de compra, este producto está garantizado contra defectos en los materiales o la mano. Un producto defectuoso se reciben reparación gratuita o reemplazo si la reparación no esté...

  • Page 28: Especificationes

    Siempre se debe usar vestimenta adecuada. Nunca use ropa suelta o las joyas que puedan quedar atrapados en las piezas móviles. Puestas unas chanclas de goma está recomendado para las mejores condiciones. Siempre utilice gafas de seguridad y Use protección para los oídos. También usa una cara o mascarilla si la operación de corte es polvoriento.

  • Page 29: Rubber Foot

    Manivela...........1 Arandela M6........2 DESEMBALAJE y comprobación CONTENIDO Tuerca Hexagonal M6........2 Modelo 10-321 14” Sierra de cinta se envía completa en una sola Tornillo Hexagonal M8x45........1 caja. Tuerca Hexagonal M8........1 A. Todas las partes separadas del cartón y compruebe cada tema con los envases de cartón contenidos lista a continuación para...
  • Page 30 3. ASAMBLEA INICIAL La banda 10-321 se vio facilitada parcialmente montado. Antes de su utilización, los siguientes elementos han de ser montados: Abrir, 2-1/ 2” Puerto de polvo, Tabla, tensión de la Hoja Mando, porta herramientas, y Manivela. ADVERTENCIA: Para evitar lesiones, no intente ejecutar o utilizar esta máquina hasta que todos se arman y funciona correctamente.
  • Page 31 E. Busque cuatro pernos hexagonales y cuatro arandelas de la I. Ensamblar la herramienta titular a la columna de la sierra de cinta bolsa de piezas sueltas usada para montar el cuadro. Montar la con dos tornillos de cabeza pan. Busque dos tornillos pan de la tabla en la tabla superior charnela e instalar un perno con lavadora bolsa de piezas sueltas.

  • Page 32: Ajuste

    Sé tu banda VIO Tensión de la Hoja Mando Tensión de la Bloqueo de la Puerta Hoja Indicador Lamina Perilla de Rastreo Bandwheel Puerta Superior Herramienta Titular Guía Ajuste Posterior Mando Guías Cuchilla Insertar Tabla Intercambiar Tabla Superior Charnela Menor Bandwheel Tabla Charnela Inferior Tabla Motor...
  • Page 33 3. LA MESA CUADRADA DE VUELTA DE HOJA 6. MODIFICAR y ADECUAR LA CUCHILLA Esta banda se vio de fábrica equipada con un propósito general Colocar un cuadrado en la parte trasera (no-diente) lado de la cuchilla para cortar madera, la cuchilla está establecido antes de la cuchilla.
  • Page 34 8. AJUSTE DE LA altura de corte La hoya inferior Guía A. Para ajustar la hoya inferior guías, primera posición derecha e A. La hoya superior guía debería establecerse lo más próxima po- izquierda de rodillos guía relativa a la cuchilla afl ojando la tuerca de sible en la pieza de trabajo.
  • Page 35 13. CORREA posiciones alta/baja velocidad A. La baja velocidad 1620 ft/min y colocar el cinturón de la polea B. Para la alta velocidad 3341 ft/min, el uso del cinturón debería ser frontal tanto en el motor y bandwheel. (Ver Fig. 23) montados en la parte trasera polea tanto en el motor y bandwheel.

  • Page 36: Operación

    OPERACION ADVERTENCIA: Antes de comenzar verifi quen si alguna parte de FIG. 26 Aspa tu banda vio falta, mal funcionamiento, ha sido dañado o rota, como en el interruptor motor u otra operación, control, un dispositivo de Correcto seguridad o el cable de alimentación, apague la banda vio apagado y desconéctelo hasta la parte en concreto está...

  • Page 37: Mantenimiento

    MANTENIMIENTO ADVERTENCIA: Para evitar lesiones debido a las inesperadas empezando, antes de la limpieza o llevar a cabo trabajos de man- tenimiento, apague y desconecte la sierra de cinta de la fuente de energía. Nunca utilice agua u otros líquidos para limpiar la sierra de cinta. Uti- lizar un pincel seco.
  • Page 38 SOLUCIONAR PROBLEMAS Problema Diagnóstico Remedio La máquina no funciona cuando son acti- 1. Ninguna fuente de alimentación. 1. Compruebe el cable de rotura. vados. 2. Interruptor Defectuoso. 2. Reemplazar el interruptor de bloqueo. 3 Motor Defectuoso. 3. Motor Defectuoso. La cuchilla no se mueve con el motor en 1.

  • Page 39: Partes Diagramas

    PARTES DIAGRAMA 1 Listas de piezas 1 DESCRIPCIóN KEY NO. MFG. PART NO. Haz Frente 1-JL21050004-001Z Haz Lado 1-JL21050005-001Z Pierna 1-JL21050001-001Z Panel Lateral 1-JL21050003-001Z Panel Frontal 1-JL21050002-001Z Tuerca Hexagonal 1-NUT5/16B Arandela 1-WSH8GB97D1B Tornillo Hexagonal 1-NEC5/16X5/8B Arandela 1-WSH6GB96B Tuerca Hexagonal 1-NUT1/4B Tornillo Hexagonal 1-HEX1/4X1 1/2B Calzado de Goma...
  • Page 40 PARTES DIAGRAMA 2 10 11...
  • Page 41 LISTA DE PIEZAS 2 KEY NO. MFG. PART NO. DESCRIPCIóN 1-JL21010001A-001S Comienzo plug 1-JL21011000R050W Enmarcar 1-JL20010008 Hoja resorte 1-RVT4X8GB12618A Remache 1-M6GB889Z Tuerca M6 1-JL26010007 Buje 1-M6X25GB70Z Tornillo hexagonal M6X25 1-M6GB889Z Tuerca M6 1-JL26010006-001S Bloqueo de la Puerta mando 1-M6X22GB70Z Tornillo Hexagonal M6X25 1-M20GB6173Z Tuerca Hexagonal M20 1-JL21012000J-049W...
  • Page 42 PARTES DIAGRAMA 3...
  • Page 43 LISTA DE PIEZAS 3 KEY NO. DESCRIPCIóN MFG. PART NO. Buje 1-JL28020004 1-JL21020001K Cuchilla Rueda Superior 1-JL21022001A 1-CLP40GB893D1B Anillo de retención 40 Sopotar 1-BRG6203-2Z-P5GB276 1-JL21022002A Llanta Rueda Inferior 1-JL21023002C 1-JL20020002 La correa Rueda Tensión 1-JL20014002A 1-BRG6001-2RSGB276 Sopotar Anillo de retención 28 1-CLP28GB893D1B 1-CLP12GB894D1B Anillo de retención 12...
  • Page 44 PARTES DIAGRAMA 4...
  • Page 45 LISTA DE PIEZAS 4 KEY NO. MFG. PART NO. DESCRIPCIóN 1-JL20030001A CHARNELA inferior tabla 1-M8GB6177B Brida tuerca M8 1-M8X20GB14Z Transporte perno M8x20 1-JL20030004 Volviendo etiqueta 1-ST3D5X9D5GB845Z Tornillos 3.5x9.5 1-1506003 Puntero 1-JL22020002-001S Manija 1-JL21031003 Tubo 1-M8X20GB5783Z Tornillo Hexagonal 1-WSH8GB93Z Arandela de tipo resorte 1-WSH8GB96Z Arandela 1-WSH6GB97D1Z...
  • Page 46 PARTES DIAGRAMA 5...
  • Page 47 LISTA DE PIEZAS 5 KEY NO. MFG. PART NO. DESCRIPCIóN 1-WSH8GB93Z Arandela de tipo resorte Tuerca Hexagonal M16 1-M16GB6171Z 1-WSH16GB93Z Arandela de tipo resorte 16 Rueda carro 1-JL20021005A001Z 1-JL20021006D Cojinete superior perno Star cerradura 1-JL20021004 1-JL20021002 Montar el eje Ajuste mando pac 1-JL20024001-001S 1-JL20024002-001S Ajuste mando cuerpo...
  • Page 48 PARTES DIAGRAMA 6...
  • Page 49 LISTA DE PIEZAS 6 KEY NO. MFG. PART NO. DESCRIPCIóN Guía Superior cuerpo 1-JL21042001 1-JL21042002 Guía Superior monte Transporte pernoM8x20 1-LOC5/16Z 1-WSH8GB97D1Z Arandela 8 Tuerca Hexagonal 1-NEC5/16X7/8 1-JL22041004 Limpiador Especial Guía Superior eje 1-JL22042002 1-M6X10GB80B Tornillo Hexagonal M6x10 Tornillo Hexagonal M6x16 1-M6X16GB5783B 1-M6GB6170Z Tuerca Hexagonal M6...
  • Page 50 How-To’ s for all Band Saw Blades Blade Width - Inches Choosing the Correct Blade Width Radius Chart If no such instructions are provided, blade width should be determined with the following guidelines: Blade width is measured from the tips of the teeth to the back edge of the blade as shown above.

  • Page 51: Year Limited Warranty

    Warranty 5-Year Limited Warranty RIKON Power Tools Inc. (“Seller”) warrants to only the original retail consumer/purchaser of our RIKON Power Tools Inc. (“Seller”) warrants to only the original retail consumer/purchaser of our products that each product be free from defects in materials and workmanship for a period of fi ve products that each product be free from defects in materials and workmanship for a period of fi...
  • Page 52 For more information: 16 Progress Rd Billerica, MA 01821 877-884-5167/978-528-5380 techsupport@rikontools.com www.rikontools.com Copyright RIKON Power Tools Inc. 2013 Printed in China 1/13...

Table of Contents