Advertisement
Quick Links
Advertisement
Related Manuals for Neunaber INSPIRE TRI-CHORUS PLUS
Summary of Contents for Neunaber INSPIRE TRI-CHORUS PLUS
- Page 1 INSPIRE TRI- CHORUS PLUS...
- Page 2 Thank you for purchasing our product. We really mean it. We hope to earn your trust by delivering a quality product that inspires you to make great music. Neunaber products are designed and manufactured in Orange, California USA. Please visit www.neunaber.net for more information and support.
- Page 3 PEDAL MAP 9 - 12V DC mix control depth control effect selector rate control setting-specific control output 1 (mono) input 1 (mono) output 2 input 2 enabled bypass switch LED indicator...
- Page 4 CONNECTIONS We recommend that Inspire be placed after your preamp or drive pedals but before any delay-based effects (echo, reverb). If you are using the overdrive channel of your amplifier, the best result will be achieved by placing this effect in the effects loop.
- Page 5 The INPUT JACKS (right side) accept inputs directly from your instrument, amplifier effects loop output, or other effect pedals via standard 1/4” (6.35 mm) phone connectors. • Input 1 only accepts a mono input. • Both Inputs 1 & 2 accept a stereo input. •...
- Page 6 EFFECTS The classic tri-chorus effect. adjusts the effect adjusts the pitch depth mix from 100% dry to 100% wet controls the controls the frequency modulation rate from response of the effect 0.5 to 6 cycles per only (wet signal) second Two tri-chorus effects are paralleled for an ultra-dense effect.
- Page 7 CASCADE TONE Two tri-chorus effects in series create a rich, lush effect. adjusts the effect adjusts the pitch depth mix from 100% dry to 100% wet controls the controls the frequency modulation rate from response of the effect 0.5 to 6 cycles per only (wet signal) second CASCADE VIBE...
- Page 8 HARMONIC VIBE Low-frequency tri-chorus and high-frequncy tri-vibrato—more subtle than Casdade Vibe, this effect works well with overdrive. adjusts the effect adjusts the pitch depth mix from 100% dry to 100% wet controls the controls the vibrato rate modulation rate from 0.5 to 6 cycles per second HARMONIC DETUNE...
- Page 9 +DETUNE Tri-chorus plus detune—for the ultimate in lush 80’s chorus tones. adjusts the effect adjusts the pitch depth mix from 100% dry to 100% wet controls the controls the pitch offset, modulation rate from from 0 to -20 cents 0.5 to 6 cycles per second +ECHO Tri-chorus plus stereo echo is a classic combo.
-
Page 10: Specifications
SPECIFICATIONS Electrical Nominal input level -10 dBV, instrument level Max input level 6.7 dBV Input impedance 1 MΩ (mono), 2 MΩ (stereo) Output impedance 500 Ω (mono), 1 kΩ (stereo) Gain, enabled vs. bypass 0 dB (mix @ 0) Frequency response 20 Hz—20 kHz, +0.1 dB, -0.5 dB (dry signal or bypassed) Total harmonic distortion... - Page 11 At Neunaber, we love to see what you do with your ‘toys’. We encourage you to tag us in your posts, pictures & videos featuring your Neunaber gear. To stay connected, go ahead and follow us on the channels seen below. We can’t wait...
- Page 12 net...
Need help?
Do you have a question about the INSPIRE TRI-CHORUS PLUS and is the answer not in the manual?
Questions and answers