HPE FlexNetwork MSR954 Command Reference Manual page 105

When you configure the IP address and port number for a UDP listening service on the NQA server,
follow these restrictions and guidelines:
•
The IP address and port number must be unique on the NQA server and match the
configuration on the NQA client.
•
The IP address must be the address of an interface on the NQA server.
•
To ensure successful NQA operations and avoid affecting existing services, do not configure
the UDP listening service on well-known ports from 1 to 1023.
Examples
# Configure a UDP listening service to enable the NQA server to listen to port 9000 on the IP address
169.254.10.2.
<Sysname> system-view
[Sysname] nqa server udp-echo 169.254.10.2 9000
Related commands
display nqa server
nqa server enable
91