Showline SL HYDRUS 350 Quick Start Manual page 8

QuickStart Guide
First Level
Lamp Control
Personality
Reset Function
Effect Adjust
7
Second Level
Lamp ON/OFF ON or OFF
Automatic On ON or OFF
Lamp On via DMX ON or OFF
Lamp Off via DMX ON or OFF
20~79 Deg C (default is 45 deg C)
Max. On Temp
68~174 Deg F (default is 113 deg F)
80~139 Deg C (default is 130 deg C)
Lamp Off Temp
176~282 Deg F (default is 266 deg F)
Address Via DMX ON or OFF
No DMX Status CLOSE /
HOLD / AUTO
Pan Reverse ON or OFF
Tilt Reverse ON or OFF
Status Settings
Pan Degree 630 or 540
Feedback ON or OFF
Hibernation OFF / 1 to 99 Minutes
Password XXX
Service Setting
RDM PID XXXXXX
Shutoff Time 2 to 60 minutes
Display Setting Display Reverse AUTO / ON / OFF
Key Lock ON or OFF
Temperature C/F Celsius or Fahrenheit
Initial Status Control XXX
DMX Only / Art-Net On IP2 / Art-Net
Select Signal
On IP10
Set Universe 000 to 255
Reset Default ON or OFF
Reset All
Reset Pan & Tilt
Reset Colors
Reset Gobos
Reset Shutter
Reset Others
Test Channel Control XXX
Manual Control Control XXX
Calibrate Password
Calibration
Pan XXX
Menu System
Table 4: Menu Settings
Third Level
SL HYDRUS 350 Luminaire
Description
Turns lamp ON or OFF. OFF is default.
When unit is first powered on, this setting
determines if the lamp is automatically struck.
Default setting is OFF.
When this unit is connected to and sees a DMX
signal, the lamp will strike. Default is ON.
When this unit is no longer connected to or sees a
DMX signal, the lamp will douse. Default is ON.
Value which the lamp is capable of being struck. If
the temperature of the head is above the set value,
the lamp will not strike.
Value which the lamp will douse once it detects the
set temperature.
Allows RDM setting of start address. Default is ON.
Defines fixture behaviour on loss of DMX signal.
Default is Close.
Setting to reverse the pan movement. Default is OFF.
Setting to reverse the tilt movement. Default is OFF.
This setting sets the amount of pan travel 630 or 540
degrees. Default is 540 degrees.
Pan & Tilt motor position feedback. Default is ON.
Sets standby mode. Default is 15 minutes.
Password for RDM PID editing. Password is "050"
Displays RDM PID Code.
Sets the amount of time the LCD display will stay on
after last button press. Default is 5 minutes.
This menu option flips the LCD Display 180 degrees.
Default is AUTO (automatic flips according to
luminaire orientation).
This option can be set to prevent unauthorized
changes (locks display). Default is OFF.
Displays temperature values in the set scale. Default
is Celsius.
Selection and manual adjustment of fixture parameters
for initial powerup preset.
Selects the control system the luminaire will operate.
Default is DMX Only.
Sets the Art-Net Universe.
Restores the fixture to factory defaults. Default is
OFF.
Resets (re-calibrates) all motors in the luminaire.
Resets (re-calibrates) Pan and Tilt.
Resets (re-calibrates) color wheels.
Resets (re-calibrates) gobos.
Resets (re-calibrates) shutter / dimmer.
Resets (re-calibrates) Zoom, Prism, and Animation
Motors.
Manual selection of fixture parameters for ramping up
and down.
Select and adjust fixture parameters for local control.
Password is "050"
Sets centre points for parameter ranges.
Sh wline