Cleaning: Decorative Trim; Cleaning: Black Painted Or Chrome Effect Surfaces; Cleaning Coals, Pebbles, And Ceramic Parts; Service And Maintenance - Matchless Leanline III TC User Instructions

Warning: -Before YGlUclean any part of the appliance ensure that the appliance is turned
and cool.
CLEANING: DEdoRATIVE
• The finish of the"'~rim is coated with a high temperature lacquer, it can be wiped with a
clean, dry, cloth qnlY.
• The trim should be removed for cleaning. The fret should be removed before removing the
trim, which is held in place by four magnetic strips.
CLEANING: BL~CK PAINTED or CHROME EFFECT SURFACES
• These surfaces' Jhould be dusted regularly and any marks removed with a soft cloth.
• Abrasive or chemical cleaner should never be used.
CLEANING COAES, PEBBLES
Important: - Re r to the 'Heath
booklet before c eaning or replacing any refractory material.
• The coals & pebb es are delicate and they should be handled with great care.
• The loose coals may be removed for cleaning. They can be brushed very gently with a
brush to remove dust or any deposits.
• Care should be t~ken to avoid contact with the refractory lining, this is a delicate surface
should not be wi~ed or rubbed.
• A vacuum cleaner
SECTION FI E
Like all apPliancesiincorporating
particularly on the ow setting, this is quite normal and does not affect the operation of
appliance.
It is advised that the LEANLlNE III TC OR III TC Lo fire is serviced annually this is more likely
provide trouble-free operation.
It is important that: -
I
• The chimney or ~Iue is checked annually to ensure clearance of combustion products.
• The fire does not normally require purpose-built ventilation but if for any special
purpose-built ventilation is provided it should be checked periodically to ensure freedom
obstruction.
• Any debris fromlhe
for three to four ours before it is removed.
• Rubbish must n t be thrown onto the coal bed under any circumstances.
• The cast fire front must be positioned in front of the fire whilst it is burning
The only user removable parts are: -
• Cast fret ~
• Loose fuel bed omponents
• Decorative effec tri m
TRIM
and
&
may only be used after all the loose coals have been removed.
an aerated burner a Low frequency
chimney or flue should be removed. The fire should be allowed to cool
Users
CERAMIC PARTS
Safety Notice located
Instructionsl
on
page 3 of this
noise may be heard,
reason
58201
off
soft,
soft
and
the
to
from