Configuring Rollback
Verifying the Rollback Configuration
To display the rollback configuration information, perform one of the following tasks:
Command
show checkpoint name [all]
show checkpoint all [user | system]
show checkpoint summary [user | system]
show diff rollback-patch {checkpoint
src-cp-name | running-config | startup-config |
file source-file} {checkpoint dest-cp-name |
running-config | startup-config | file dest-file}
show rollback log [exec | verify]
Use the clear checkpoint database command to delete all checkpoint files.
When a checkpoint is created, you can view the default configuration priority-flow-control mode auto
Note
using the show run all command. You cannot view the configuration priority-flow-control mode auto
using the show run command for the interface.
Configuration Example for Rollback
This example shows how to create a checkpoint file and then implements a best-effort rollback to a user
checkpoint name:
checkpoint stable
rollback running-config checkpoint stable best-effort
Additional References
Related Documents
Related Topic
Rollback CLI commands
Purpose
Displays the contents of the checkpoint name.
Displays the contents of all checkpoints. You can limit
the displayed checkpoints to user or system generated
checkpoints.
Displays a list of all checkpoints. You can limit the
displayed checkpoints to user or system generated
checkpoints.
Displays the differences between the source and
destination checkpoint selections.
Displays the contents of the rollback log.
Document Title
Cisco Nexus 7000 Series NX-OS System Management
Command Reference
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Verifying the Rollback Configuration
153