Overview Icons Inline control LEDs Function Call button Triple flash green Incoming call Double flash green Call on hold Solid green On a call Volume up button Increases the listening volume Volume down button Decreases the listening volume Mute button Solid red Headset is muted...
Ensure that your 3.5 mm connector is fully connected to the headset controller. Load software IMPORTANT Some softphones require the installation of Plantronics Hub for Windows/Mac to enable headset call control (answer/end and mute) functionality. Download Plantronics Hub for Windows/Mac by visiting plantronics.com/software.
Adjust the headband Lengthen or shorten the band until it fits comfortably. The cushions should sit comfortably over the center of your ears. Position the boom The headset can be worn with the boom on your left or right side. For true stereo listening, wear the boom on your left side.
Headset call control is a software feature and dependent on a compatible softphone. If you have not installed Plantronics Hub or do not have a compatible softphone, press the headset call button first and then make/take/end the call using the softphone application. Download Plantronics Hub for Windows or Mac atplantronics.com/software...
• If required to enable headset control (answer/end and mute) functionality, ensure you have Plantronics Hub for Windows/Mac installed. See Load software. • Your mobile device may not support call control functionality.
Need help?
Do you have a question about the Blackwire 5200 Series and is the answer not in the manual?
Questions and answers