Load Factory Default; Password; Misc. Settings - Moxa Technologies OnCell G3470A-LTE User Manuals

OnCell 3470A-LTE
To download the configuration to the OnCell G3470A-LTE, complete the following steps:
1. Turn off the OnCell G3470A-LTE.
2. Connect ABC-01 to the OnCell G3470A-LTE's RS-232 console.
3. Turn on the OnCell G3470A-LTE.
4. The OnCell G3470A-LTE detects ABC-01 during the boot up process and automatically downloads the
configuration from ABC-01. After the configuration is downloaded and if the configuration format is correct,
the OnCell G3470A-LTE emits three short beeps before continuing the boot up process.
5. After the boot up process is complete, the OnCell G3470A-LTE emits two beeps, and the Ready LED turns
solid green.

Load Factory Default

Use this function to reset the OnCell G3470A-LTE and roll all settings back to the factory default values. You can
also reset the hardware by pressing the reset button on the top panel of the OnCell G3470A-LTE.

Password

You can change the administration password for each of the OnCell G3470A-LTE's console managers by using
the Password function. Before you set up a new password, you must input the current password and reenter
the new password for confirmation. For your security, do not use the default password root, and remember to
change the administration password regularly.

Misc. Settings

Additional settings to help you manage your OnCell G3470A-LTE, are available on this page.
3-39
Web Console Configuration