Connecting Other Equipment; Antenna Jack - Sanyo CP14SE1 Instruction Manual

Connecting other Equipment

Connecting to a DVD Player with AV1
(DVD) Video Component Output Terminal
(Y, Cb or Cr) (optional models)
Connect the component output terminal on your DVD play-
er to the component video input terminal of this product.
(NOTE: When a signal of Y,Cb,Cr/Y,Pb,Pr is received, the
output signal from monitor output terminal will be corre-
sponding but without colour (black and white image).)
To Input Terminal C
R
To Input Terminal C
B
To Input Terminal Y
To watch a program in this connection status, select
AV1(DVD).
In this connection status, whenever the TV/AV button is
pressed, the mode will change as follows:
28 AV1
(TV mode)
Make sure the component video terminal (Y, Cb or Cr)
is connected correctly.
Connecting to the Front AV2 Input Jacks
It is convenient to use the AV input jack on the front panel
for equipment that is often connected and disconnected.
INPUT MONITOR OUT
AV1/DVD
C R R
R
To Audio Input-R (AV1)
(MONO)
C L L
B
To Audio Input-L (AV1)
Y
V
I
D
VIDEO
E
O
Video/DVD Player
AV1(DVD)
(Optional model)
To watch the Front video
input picture, select AV2 (AV
position for monaural
models) position by pressing
the TV/AV Selector.
Note: For Monaural models
Do not connect external equip-
ment to both rear and front AV
input jacks to avoid signal mix
and distorted picture.
Video/DVD Player
Connecting to the Monitor Output Jacks
The picture signal being displayed on the TV screen is out-
put through the Monitor Output Jacks. Use these terminals
to record TV broadcasts and for video dubbing from AV1
or AV2 input terminals.
AV1/DVD
C
R
C
B
Y
To video and
audio inputs
VCR for Recording
To record TV programme, select TV mode by
pressing the TV/AV Selector and record the desired
programme.
To dub video from the AV1 terminal input, select AV1
position and (for Monaural models select AV position)
by pressing the TV/AV Selector.
AV1
AV2
Connecting to AV Device with TV

Antenna Jack

AV device can be connected to the antenna jack of the
TV set.
Antenna Jack
To watch programs input from the antenna jack, operate
as follows:
(1) Start on the AV device to play the program.
(2) Select the channel position desired, and start manua
tuning.
See instruction manuals of the relevant AV devices for
details of connection and adjustment.
INPUT MONITOR OUT
R R
To Audio Output-R
(MONO)
L L
To Audio Output-L
V
I
D
VIDEO
To Video Output
E
O
15
TV mode
AV
PLAY
Monaural
models
AV Device
9