Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Tyrepal Solar
Summary of Contents for Tyrepal Solar
- Page 1 SOLAR Tyre Pressure Monitoring System TyrePal Solar Innovative safety solutions for your peace of mind TyrePal, Wheel Solutions Ltd, Unit 2 Upper Keys Business Park, Keys Park Road, Hednesford, Cannock, Staffordshire, WS12 2GE Telephone: +44 (0) 1543 870170 Email: Enquiries@tyrepal.co.uk...
-
Page 2: Table Of Contents
CONTENTS Sections Page System Contents Monitor Icons Important Safety Notes Before Installation Wheel Balancing Charging The Monitor Monitor Mounting Turning On And Off Tyre Pressures And Alert Levels Sensor Installation Sensor Battery Replacement Re-code the sensors Settings Mode Set Units Set Alert Levels Normal Display Warnings And Alerts... -
Page 3: System Contents
Sensor Tool Dust Shield Hex Wrench Hex Nut Rubber O-Ring (1pair) (6pcs) (1pc) (4pcs) (4pcs) Power Socket 2. MONITOR ICONS Solar panel Icon Tyre Power On/Off Tyre Alarm Status Pressure unit: BAR or PSI, User-selectable Temperature unit: ℃ or ℉, User-selectable... -
Page 4: Important Safety Notes
3. IMPORTANT SAFETY NOTES What to expect Unless you have used this type of TPMS before, you will probably be unaware of what happens to your vehicles’ tyres whilst driving. The tyres’ pressure and temperature will naturally increase whilst you are driving your vehicle. This is completely normal and is taken into account when the tyres are designed and manufactured. -
Page 5: Before Installation
4.2 Charging the monitor The solar panel on the monitor will keep the internal battery charged as long as there is sufficient sunlight available. Should the battery charge level become low, recharge with the supplied DC charger (approximately 2.5 hours of charge will fill the battery). -
Page 6: Sensor Installation
5. SENSOR INSTALLATION The sensors are pre-registered to the monitor and labelled with the appropriate tyre position. LF, LR, RF, RR, for 4 tyres or LF, LR1, LR2, RF, RR1, RR2 for 6 tyres. Note: Install the sensors to the appropriate tyres. LR2 LR1 RR1 RR2 Ensure the monitor is turned on before installing the sensors so that the monitor can receive up... -
Page 7: Sensor Battery Replacement
ºC battery cell for TCSN which operates at -40 to 80 is recommended. You can buy replacement batteries from the TyrePal website. 1. Use fixture provided inside package and open the plastic enclosure in counter clockwise direction. Battery opener tools... -
Page 8: Re-Code The Sensors
7. RE-CODE SENSORS The factory has already coded 4 sensors to the monitor, and the sensors can be re-coded accordingly to actual tyre position after exchanging the tyres. In standby mode, press and hold “+” button and release it after the beep sound to enter learning mode, the tyre icon will flash on the LCD with “id”... -
Page 9: Set Alert Levels
7.3 Set alert levels ▪ In settings mode, scroll through the pressure and tempera- ture settings until the wheels for the front axle are flashing ▪ Press the UP (+) or DOWN (-) button to adjust the settings ▪ Press and release the SET button to move on and set the low pressure alert levels using the UP (+) or DOWN (-) buttons ▪... -
Page 10: Normal Display
Plug in to charge the battery and the icon becomes animated to show the charging in process. If a sensor battery is low, the sensor battery icon blinks, together with the appropri- ate tyre icon. The sensor battery must then be replaced. They are available on-line from our TyrePal shop. -
Page 11: Alarm Condition
9. ALARM CONDITION High / Low Pressure Alert / High Temperature Alert / Fast Leakage Alert / Sensor Low Battery Alert The monitor displays the temperature and the pressure data of four sensors simultaneously. The corresponding alert icon and red LED will flash together with a warning beep when the sensor detects abnormal conditions from the tyre. -
Page 12: High Temperature Alert
9.3 High temperature alert If the front left tyre temperature is 71ºC the monitor will alert together with a warning beep, and the red LED will flash Tyre icon flash Temperature data flash Alert icon flash 9.4 Fast leakage alert The sensor will send alert data to the monitor if it detects fast leakage in a tyre. -
Page 13: Other Functions
10. OTHER FUNCTIONS Monitor displays 6 tyres 6 sensors (for motorhome): displays as below 10 seconds 11. TECHNICAL SPECIFICATION 11.1 Monitor Specification Temperature Pressure setting 16-99PSI -20ºC ~ 93ºC (77ºF ~ 199ºF) setting range range (1.0-9.9BAR) Working -20ºc ~ 80ºC Frequency 433.92MHz Temperature... -
Page 14: Sensor Specifications
11.2 Sensor Specification TCSU TCSN Working -20ºC ~ +80ºC -40ºC ~ +80ºC Temperature Storage -20ºC ~ +85ºC -40ºC ~ +85ºC Temperature 0~99 PSI Pressure range 0~99 PSI 0~6.8 BAR) 0~6.8 BAR) Pressure accuracy 1.5 PSI ( 0.1BAR) 0.1BAR) Temperature 3ºC 3ºC accuracy Transmission... -
Page 15: Managing Tyre Pressures
12. MANAGING TYRE PRESSURES The recommended tyre pressures are given in the vehicle handbook and are designed to give the best balance between comfort, road-holding and fuel economy for a given vehicle. The side-wall of the tyre is embossed with the maximum pressure for the tyre. This is NOT the recommended service pressure. - Page 16 TyrePal Limited Wheel Solutions Limited Unit 2 Upper Keys Business Park Keys Park Road Hednesford, Cannock Staffordshire WS12 2GE Telephone: +44 (0) 1543870170 Email: Enquiries@tyrepal.co.uk...
Need help?
Do you have a question about the Solar and is the answer not in the manual?
Questions and answers