Enabling Or Disabling Igmp Snooping On A Vlan Interface (Cli) - Cisco Catalyst 3650 Configuration Manual

Configuring IGMP
Examples: Configuring IGMP Snooping, on page 81

Enabling or Disabling IGMP Snooping on a VLAN Interface (CLI)

SUMMARY STEPS
1. enable
2. configure terminal
3. ip igmp snooping vlan vlan-id
4. end
5. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3 ip igmp snooping vlan vlan-id
Example:
Device(config)# ip igmp snooping vlan 7
Step 4 end
Example:
Device(config)# end
Step 5 copy running-config startup-config
Example:
Device# copy running-config
startup-config
OL-29890-01
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters the global configuration mode.
Enables IGMP snooping on the VLAN interface. The VLAN ID
range is 1 to 1001 and 1006 to 4094.
IGMP snooping must be globally enabled before you can enable
VLAN snooping.
Note
Returns to privileged EXEC mode.
(Optional) Saves your entries in the configuration file.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
How to Configure IGMP Snooping
To disable IGMP snooping on a VLAN interface, use the
no ip igmp snooping vlan vlan-id global configuration
command for the specified VLAN number.
59