Surveon CAM6351 Quick Installation Manual page 4

5
Camera Deployment
NAS
Speaker Amplifier-enabled
Microphone
Router
Router
6
Camera Before You Start
Please prepare a PC with Windows (XP or above) and web browsers (Internet Explorer 6.0 or above) installed.
Software Installation
1
Setting the Camera's IP
The network speed Dome camera's default IP address is: 192.168.0.250. Therefore, to access the camera for the
first time, set the PC's IP address as 192.168.0.XXX; for example:.
FTP Email server
IP Address: 192.168.0.100
●
ISubnet Mask: 255.255.255.0
●
2
Connecting to the Camera
1. Launch the web browser and enter the IP address of the network camera in the address bar of your browser
and press Enter.
2. Enter the default user name (Admin) and password (1234) in the prompt request dialogue. (Please note that the
user name and password are case sensitive.) Once successfully logged in, live video displays in the center of your
browser.
Client
Video format
Note: If the live view does not display normally, please go to Installing ActiveX Components Section.
Home System Streaming PTZ Logout
H.264-1 H.264-2
3
Installing ActiveX Components in Internet Explorer (Optional)
1. After connecting to the camera, the request for installing the ActiveX control will appear just
below the URL bar.
2. Right Click on the information bar, and click Install ActiveX Control... to permit ActiveX
control installation.
Home System Streaming
3. In the pop-up security warning window, click Install to start downloading DC Viewer
software on the PC.
4. Click Finish after DC Viewer installation is complete.
Languages
4
Network Configuration for DHCP Users (Optional)
For users of DHCP Server, please go to System > Network on the web interface
after logging into the camera to change the setting to Get IP Address Automatically.
Home System Streaming
System
Network
Security
General
Get IP address automatically
Network
Basic
QoS
SNMP
UPnP
DDNS
Imstall ActiveX Control...
What's the Risk
Information Bar Help
Cam
PTZ Logout