Advertisement
6. Connect Network Cables
1
1
For the RJ-45 Management port, connect 100-ohm Category
5, 5e or better twisted-pair cable.
2
Connect DAC cables to the SFP+/QSFP+ slots. Or first install
SFP+/QSFP+ transceivers and then connect fiber optic
cabling to the transceiver ports.
The following transceivers are supported:
◆
40GBASE-CR4
◆
40GBASE-SR4
◆
10GBASE-CR
◆
10GBASE-SR
◆
1000BASE-SX
◆
1000BASE-LX
Note:
As connections are made, check the port status LEDs
to be sure the links are valid.
2
Hardware Specifications
Chassis
Size
W x D x H:
438.4 x 473 x 43.4 mm (17.26 x 18.62 x 1.71 inches)
Weight
8.395 kg (18.51 lb), with two installed power supply
modules
Temperature
Operating: 0° C to 40° C (32° F to 104° F)
Storage: -40° C to 70° C (-40° F to 158° F)
Humidity
Operating: 5% to 95% (non-condensing)
Up to 3000 m (10,000 ft)
Operating
Altitude
Acoustics
Noise Emission LpA=60 dB at virtual workspace
according to DIN 45635 T.19
Power Supply
AC Input
100-240 VAC, 50-60 Hz, 6-3 A
DC Output
5 VDC @ 3 A
12 VDC @ 33 A
Power Supply 100-240 VAC, 50-60 Hz, auto-sensing; hot
pluggable
400 Watts @ 240V/100V per module
Power
165 Watts maximum
Consumption
Maximum
6 A @ 100 VAC
Current
3 A @ 240 VAC
Size
W x D x H:
54.5 x 220 x 40.25 mm (2.15 x 8.66 x 1.58 inches)
Regulatory Compliances
Emissions
EN 55022:2010, Class A
EN 61000-3-2:2009, Class A
EN 61000-3-3:2008
FCC Class A
VCCI Class A
CE Mark
Immunity
EN 55024:2010
IEC 61000-4-2/3/4/5/6/8/11
Safety
UL (CSA 22.2 No 60950-1 & UL60950-1)
CB (IEC/EN60950-1)
– 2 –
Quick Start Guide
Advertisement
