Introduction; How To Obtain Parts - Fluke 45 Service Manual

6-1. Introduction

This chapter contains an illustrated list of replaceable parts for the Fluke 45 Dual
Display Multimeter. Parts are listed by assembly; alphabetized by reference designator.
Each assembly is accompanied by an illustration showing the location of each part and
its reference designator. The parts lists give the following information:
•
Reference designator
•
An indication if the part is subject to damage by static discharge
•
Description
•
Fluke stock number
•
Total quantity
•
Any special notes (i.e., factory-selected part)
A * symbol indicates a device that may be damaged by static
discharge.

6-2. How to Obtain Parts

Electrical components may be ordered directly from the manufacturer by using the
manufacturers part number, or from the Fluke Corporation and its authorized
representatives by using the part number under the heading FLUKE STOCK NO.
Parts price information is available from the Fluke Corporation or its representatives.
Prices are also available in a Fluke Replacement Parts Catalog which is available on
request.
In the event that the part ordered has been replaced by a new or improved part, the
replacement will be accompanied by an explanatory note and installation instructions, if
necessary.
To ensure prompt delivery of the correct part, include the following information when
you place an order:
•
Instrument model and serial number
•
Part number and revision level of the pca containing the part.
•
Reference designator
•
Fluke stock number
•
Description (as given under the DESCRIPTION heading)
•
Quantity
Caution
List of Replaceable Parts
Introduction
6
6-3