mothercare Car Walker User Manual page 3

3
preparation for use • preparación para el uso
assembling the car walker
1
2
3
assembling the car walker
Press the button in the centre of the kick pad
and slide it along the runners to the back of the
base to form a square.
Press the button in the centre of the kick pad
and slide it along the runners to the back of the
base to form a square.
Turn the base over and insert the wheels. There
are four and they slot into the holes in each
of the four corners of the base. Make sure you
push each wheel all the way in.
Turn the base over and insert the wheels. There
are four and they slot into the holes in each
of the four corners of the base. Make sure you
push each wheel all the way in.
Unscrew the battery cover using a Phillips
screwdriver and insert 3 AA batteries into the
battery compartment on the kick pad.
Unscrew the battery cover using a Phillips
screwdriver and insert 3 AA batteries into the
battery compartment on the kick pad.
3
preparation for use • preparación para el uso
4
5
6
Make sure the dial on each support leg is set
to Lock.
NOTE: The number 1 indicates the height setting
of the walker. For more information, please
see the 'Adjusting the height of the car walker'
section in this guide.
Make sure the dial on each support leg is set
to Lock.
NOTE: The number 1 indicates the height setting
of the walker. For more information, please
see the 'Adjusting the height of the car walker'
section in this guide.
Rest the seat unit on its side and push each
support leg into the slots on either side until
they click into place. Make sure they are secure
by tugging on each leg.
Rest the seat unit on its side and push each
support leg into the slots on either side until
they click into place. Make sure they are secure
by tugging on each leg.
Lower the assembled seat unit and support
legs onto the base. Slot the legs into the holes
on either side of the base and push down until
they click into place. Make sure the structure is
secure by lifting it by the seat unit to check the
base doesn't fall away.
Lower the assembled seat unit and support
legs onto the base. Slot the legs into the holes
on either side of the base and push down until
they click into place. Make sure the structure is
secure by lifting it by the seat unit to check the
base doesn't fall away.