Operating The Massage Chair; Controller - Brookstone energize 3D User Manual

Before operating the massage chair, review the warnings beginning on
Page 2.
• Do not operate if there are any holes or tears in the chair covering. Unplug
the chair and contact Brookstone Customer Service at 866-336-3199.
• To avoid overheating, the massage chair will automatically shut off if it
begins to overheat. Allow the chair to cool for a minimum of 30 minutes
before starting another massage session.
• When adjusting the backrest and foot rest, always ensure there is no object
under the footrest/seat and keep children or pets away to prevent injury.
• Do not sit on the Energize™ 3D Massage Chair with the foot rest raised.
Any sudden heavy weight on the foot rest could cause damage to the
mechanism, accident and injury if the massage chair tips over.
• Ensure that the backrest returns to its full upright position before sitting on
the massage chair and reclining it according to your preference.
• Do not place fingers or objects in the gap between the seat and the sides/
backrest/footrest.

OPERATING THE MASSAGE CHAIR

1. Ensure that the main power switch, located on the back of
the chair, is in the OFF ( O ) position.
2. Plug the power cord into the power inlet on the back of the chair, and plug
the other end into an appropriate outlet. See Page 5 for information on
appropriately grounded outlets.
3. Click the main power switch, located on the back of the chair,
to the ON ( | ) position.
4. Press the Power button on the controller.
5. If you would like to enjoy music during your massage, use the Quick
Access Panel to pair with Bluetooth and turn on your speakers, as
described on Page 14.
6. Select an Automatic program, described on Page 12, or a Custom
massage option, described on Page 13.
7. Optionally, customize your massage as described on Pages 11 and 13.
Each massage session should not exceed 20 minutes. Targeted
massage should not exceed 5 minutes on any one area.
8
Caution

CONTROLLER

The controller's LED indicates the chair's status. Active features are indicated
by a steadily pulsing LED. The Power button pulses slowly when in waiting
mode; it pulses quickly while changing programs. You cannot select another
option while changing programs. The LED light turns off after a few minutes;
press any button to turn the LED back on.
LCD Display, LCD Display,
see Page 10 see Page 10
General Settings, General Settings,
see Page 11 see Page 11
Automatic Programs, Automatic Programs,
see Page 12 see Page 12
Custom Settings Custom Settings
and Options, and Options,
see Page 13 see Page 13
To prevent damage to the controller:
• Do not sit on, step on, or place heavy objects on the controller.
• Do not drop the controller. Place the controller into its holder when not in use.
• Do not exert excessive force on the controller, or operate it using sharp-
edged or hard objects. Do not handle the controller with wet hands.
• Do not attempt to move the chair by pulling on the controller.
In an emergency or if there is any malfunction, press the Power
button on the controller to stop the massage, then click the main
power switch on the back of the chair to the OFF position.
9