Issue 1.0
___________________________________________________________________________________
1.9
1.10
___________________________________________________________________________________
4 - 8
Park
The Park button will transfer the active call to a specific park orbit. When this
function is selected, the following dialog will be displayed (refer to
Park Call
Screen).
The spinner control allows the user to select the destination Park orbit.
Selecting the Start button will place the active call in the selected Park
orbit.
Selecting the Cancel button will close the Park Call dialog without initiating
a call park operation.
If the Park operation fails because the selected Park orbit is not available,
an error message will be displayed.
Unpark
The Unpark button will retrieve a call from a specific park orbit. When this
function is selected, the following dialog in
be displayed.
The spinner control allows the user to select the destination Park orbit.
Selecting the Start button will attempt to retrieve a call from the specified
Figure 4-7 Park Call Screen
Figure 4-8 Unpark Call
Figure 4-8 Unpark Call Screen
SV8100
Figure 4-7
Screen, will
Toolbar Functions