JR XP810-3 Manual
  1. Manuals
  2. Brands
  3. JR Manuals
  4. Remote Control
  5. XP810-3
  6. Manual

JR XP810-3 Manual

Hide thumbs Also See for XP810-3:
Table of Contents

Advertisement

Quick Links

THE
A I R C R A F T S Y S T E M - A I R P L A N E M O D E
ULTIMATE
H E L I C O P T E R S Y S T E M - H E L I C O P T E R M O D E
RADIO CONTROL
A I R C R A F T S Y S T E M - G L I D E R M O D E
SYSTEM
8 C H A N N E L S
1 0 M O D E L M E M O R Y
3 M O D E L T Y P E
www.modelflight.com.au
S • Z P C M / P P M S E L E C T A B L E
– World's best source of JR products

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XP810-3 and is the answer not in the manual?

Questions and answers

Related Manuals for JR XP810-3

Summary of Contents for JR XP810-3

  • Page 1: Modulation Select

    1 0 M O D E L M E M O R Y 3 M O D E L T Y P E S • Z P C M / P P M S E L E C T A B L E www.modelflight.com.au – World’s best source of JR products...
  • Page 2 XP81 03 www.modelflight.com.au – World’s best source of JR products...

  • Page 3: Programming Charts

    – World’s best source of JR products...

  • Page 4: Table Of Contents

    Model Names ......29 Model Type Selection ....30 XP81 03 www.modelflight.com.au – World’s best source of JR products...

  • Page 5: Control Stick Length Adjustment

    4.7 Differential Aileron Mixing ....1 17 Flap to Elevator Mixing ....1 1 8 XP81 03 www.modelflight.com.au – World’s best source of JR products...
  • Page 6 XP81 03 www.modelflight.com.au – World’s best source of JR products...

  • Page 7: Introduction

    I. Introduction XP81 03 www.modelflight.com.au – World’s best source of JR products...

  • Page 8: How To Use This Manual

    • Increased number of mixing functions that include multi-point Function List Display. programmable mixing. • Screen contrast is easily adjustable for improved clarity in all • Programmable gyro sensitivity with automatic adjustment conditions. (helicopter only). XP81 03 www.modelflight.com.au – World’s best source of JR products...

  • Page 9: Receiver

    • The 517 has low current drain. • An indirect drive feedback potentiometer gives additional protection from vibration. • Includes SMT (Surface Mount Technology) circuitry. • The 517 features a 3-pole ferrite cored motor. XP81 03 www.modelflight.com.au – World’s best source of JR products...

  • Page 10: Component Specifications

    200mA (70mA with DSC) 200mA (70mA with DSC) Power Source 1 .2Vx8 NiCad (9.6v) 550 mAh 1 .2Vx8 NiCad (9.6v) 550 mAh Output Pulse 1000-2000 (1 500 Neutral) 1000-2000 (1 500 Neutral) XP81 03 www.modelflight.com.au – World’s best source of JR products...

  • Page 11: Servo Specifications

    Model Number 4N- 600 (Flat) 4N -1000 (Flat) Voltage 4.8V 4.8V Size (in.) (W x L x H) 2.24 x 0.59 x 2.05 2.60 x 0.63 x 1 .70 Weight (oz.) XP81 03 www.modelflight.com.au – World’s best source of JR products...
  • Page 12 XP81 03 www.modelflight.com.au – World’s best source of JR products...

  • Page 13: Common Features

    II. Common Features XP81 03 www.modelflight.com.au – World’s best source of JR products...

  • Page 14: Battery Charging

    Beware of improper connections based on “color coded” wire leads as they do not apply in this instance. You must make sure that the center pin of your JR Red to negative transmitter is always connected to the negative voltage for correct polarity hookup.

  • Page 15: General Information

    After the control stick length has been adjusted to suit your flying style, tighten the 2 mm set screw. Loosen If you desire longer sticks, JR offers a thicker stick (JRPA047) that Tighten is approximately one inch longer than the standard stick. This...

  • Page 16: Transmitter Rear

    Do not force. Cord Hook When a trainer cord is used, place the cord between this hook and the transmitter body to avoid possible cord detachment during use. XP81 03 www.modelflight.com.au – World’s best source of JR products...

  • Page 17: Dsc Cord

    Your range will not collapsed for storage in the side of the transmitter. You must also be affected when using the base loaded antenna. XP81 03 www.modelflight.com.au – World’s best source of JR products...

  • Page 18: Frequency Notes/Aircraft Only Frequencies

    (RF) module, commonly located in the Modulation Select Section of this manual. referred to as either an RF module or transmitter module. The JR (pg. 3 1) modules are universal for all modular frequency controlled systems.

  • Page 19: Screen Contrast Adjustment

    Brass Bushing 5. Mount the receiver antenna firmly to the airplane to ensure that it will not become entangled in the propeller or control surfaces. XP81 03 www.modelflight.com.au – World’s best source of JR products...
  • Page 20 XP81 03 www.modelflight.com.au – World’s best source of JR products...

  • Page 21: Airplane Section

    III. Airplane Section ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 22: Transmitter Controls

    Aile Aileron Channel position. Elev Elevator Channel Rudd Rudder Channel Gear Gear Channel Flap Auxillary 1 Channel (Flap) SPOI Auxillary 2 Channel (Spoiler) Aux 3 Auxillary 3 Channel ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 23: Heli Mode

    Gear Channel (Right Aileron Channel–AILE 2) FLAP Auxiliary 1 Channel (Left Flap Channel for Dual Flaps) AUX 2 Auxiliary 2 Channel (Right Flap Channel for Dual Flaps) AUX 3 Auxiliary 3 Channel ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 24: Connections

    Aux Channel Spoiler Channel Charge Cord or DSC Deluxe Switch Harness Receptacle (JRPA001) (JRPA024) Flap Channel Retract Gear Channel NER-649S S-PCM Receiver (JRPR649) PCM Version NER-549S FM Receiver (JRPR549) FM Version ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 25: General Information

    2.2 Normal Display Normal Display Screen transmitter voltage modulation type model number model name (when names are entered) integrated timer ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 26: System Set-Up Mode Functions

    Pg. 30 Model Type Selection Function Pg. 30 Data Reset Pg. 31 Modulation Selection Pg. 32 Data Transfer between traqnsmitters Pg. 34 Wing Type Selection Pg. 35 Spoiler Channel Input Selection ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 27: Function Mode

    Pg. 47 Programmable Mixing 4 Pg. 47 Programmable Mixing 5 Pg. 47 Programmable Mixing 6 Pg. 50 Fail-Safe/Hold (PCM Only) Pg. 52 Trainer Pg. 54 Timer Pg. 55 Servo Output Values ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 28: List Mode

    System Set-Up Mode System Mode info display SELECT CLEAR To Model Name function Function select Model selection (select model/copy) (1-10) To Info Display function ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 29: Copy Select Function

    To Model Type Selection function Press to change Press to change Changes input letter input letter arrow input letter at arrow to blank space only To Model Select/Copy position where arrow is function located ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 30: Model Type Selection

    Press simultaneously to exit the System Set-Up Mode SELECT CLEAR To Modulation Select Press to return to function factory preset data To Model Type Select function ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 31: Modulation Select

    The Modulation Selection Function enables your XP8103 to either the UP and DN, or the DN and SEL keys simultaneously to transmit to a variety of JR receivers that are already, or may soon be, in existence. You can select from either S-PCM or Z-PCM accept the new modulation type.

  • Page 32: Data Transfer

    SELECT CLEAR To Wing Type Transmitting/ Press to start selection function Press + or - Receiving Mode transmitting keys to select select data To Modulation the receiving select function model number ACRO www.modelflight.com.au – World’s best source of JR products...
  • Page 33 CLR key to start transmitting. stand-by receiving condition receiving stand-by counter condition 0-100% SELECT CLEAR To wing type selection function Transmitting/Receiving Press to start To modulation mode select select function transmitting ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 34: Wing Type Selection

    To spoiler channel Press to reset input selection function Press + or - wing type to keys to select factory preset To data transfer wing type (normal) function (normal, flapron, delta) ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 35: Spoiler Channel Input Selection

    System Set-Up Mode SELECT CLEAR To Model Type Press to return Selection function Input Selection spoiler channel (Aux 2 Pot/Mix SW) input to preset To Wing Type (Aux 2 knob) Selection function ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 36: Function Mode Functions

    To Reverse Switch Reset Dual Rate Function Select function Channel Selection Increase or Value to 100% (dual rate or (Aile, Elev, Rudd, decrease Dual exponential) To Servo Output Auto Rudd) Rate Value Indicator ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 37: Automatic Dual Rate, Exponential

    Function Mode SELECT CLEAR To Reverse Switch Press to inihbit function Channel Selection Use + or - to (Press to select activate/inhibit To Servo Output Auto Rudd) Auto D/R Indicator ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 38: Reverse Switch

    Press to reset function Channel Selection Increase or channels 1-4 Sub-trim value to (press to decrease and 5-8 factory preset (0) To Reverse Switch manipulate arrow) sub-trim value (2 Screens) function (L&R/U&D) ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 39: Travel Adjust

    Mixing function Increase/decrease mixing value to applicable mixing factory preset (0) To Travel Adjust value; move the stick or function switch to manipulate the arrow to the position to be adjusted (up/down) ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 40: Aileron To Rudder Mixing

    Mixing function (0%) mixing value ± 125% Rate to SW: At Switch: At Switch: Press to change Press to set switch to Switch Selection factory preset (ON) ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 41: Landing System

    Press to Press to increase/ arrow to factory preset To Aileron manipulate decrease servo travel position/value Rudder Mixing arrow to desired value or to store channel/function landing system throttle Function stick position ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 42: Snap Roll

    While the snap roll switch is activated, the related sticks will not operate until the switch is released. When this function is inhibited, the ACRO www.modelflight.com.au – World’s best source of JR products...
  • Page 43 Snap Roll manipulate cursor, or to inhibit To Landing arrow to desired function, to function when cursor System Mode channel/function increase/decrease is at "Direction" operating values and to select Snap Roll directions ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 44: Differential Aileron Mixing

    Function Mode List Display SELECT CLEAR To Trim Offset Memory function Press to reset DIfferential Value Differential Value to Increase or factory preset To Snap Roll Decrease (0 -100%) (NORM 0%) function ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 45: Trim Offset Memory

    Note: If the offset value is too large, a warning will sound when simultaneously to exit the Trim Memory Offset function. you return the trim levers to center, and the display shown in (4) will appear. ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 46: Flap Knob Adjustment

    To Programmable Mixing function Press to select Operational Value operating value Increase or To Trim Offset ↓ Decrease function 30% Flap Trim (1% increments) ↓ 0% Pot. INH ↓ 100% Flap Full ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 47: Programmable Mixing

    0 to 100%. “offset.” The purpose of the mixing offset is to redefine the (Refer to figure 4.1 3C). neutral position of the slave channel. ACRO www.modelflight.com.au – World’s best source of JR products...
  • Page 48 Adjustment function inhibit mixing move cursor on function, to graph to points to increase/decrease be adjusted values, and to change the EXP function from OFF to ON ACRO www.modelflight.com.au – World’s best source of JR products...
  • Page 49 - key to activate channels to be left of screen preset position/value or To Programmable the mixing function mixed to inhibit mixing Mixing or select the mixing switch ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 50: Fail-Safe/Hold

    Press either the + desired Fail-Safe or - key to select postion, then press the time delay Clear key once to store ↓ settings Hold ↓ 0.25 Sec ↓ 0.5 Sec ↓ 1.0 Sec ACRO www.modelflight.com.au – World’s best source of JR products...
  • Page 51 - key to select press the Clear key once To Programmable desired channel either Hold or Fail- to store settings Mixing 6 Safe positions for each channel ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 52: Trainer

    This is the normal mode. No each transmitter will appear to be ON, but neither is actually function set-up (reversing switch or travel adjust) is necessary to transmitting at this time. activate this system. ACRO www.modelflight.com.au – World’s best source of JR products...
  • Page 53 Master transmitter in this position, it indicates the direction SLAV: Applicable channel set to Slave the Slave channel trim MAST: Applicable channel to Master lever must be moved on the Slave transmitter ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 54: Timer

    NORMAL DISPLAY w/countdown timer function selected Timer setting time SELECT CLEAR Press to reset timer Press either key to zero to start/stop timer ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 55: Servo Output Indicator

    Press the UP and DN keys Press the DN and Select keys simultaneously to enter/exit simultaneously to access the the Function Mode Function Mode List Display SELECT CLEAR To Dual Rate Exponential function To Timer function ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 56: Xp8103 Data Sheet

    XP8103 DATA SHEET ACRO SPCM • ZPCM • PPM FAIL-SAFE (SPCM • ZPCM) DIFFERENTIAL ACRO www.modelflight.com.au – World’s best source of JR products...

  • Page 57: Helicopter Section

    IV. Helicopter Section HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 58: Transmitter Controls

    Aile Aileron Channel position. Elev Elevator Channel Rudd Rudder Channel Gear Gear Channel Aux 1 Auxillary 1 Channel (Pitch) Aux 2 Auxillary 2 Channel (Gyro Sensitivity) Aux 3 Auxillary 3 Channel HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 59: Airplane Mode

    Elevator Channel Input Keys RUDD Rudder Channel AIL2 Right Aileron Channel FLAP Left Flap Channel for Dual Flaps AUX 2 Right Flap Channel for Dual Flaps AUX 3 Auxiliary 3 Channel HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 60: Switch Warning Safety Feature (Heli Mode)

    GEAR Elevator NER-649S RUDD ELEV 72 MHZ Aileron AILE JAPAN REMOTE CONTROL CO. LTD THRO MADE IN JAPAN Throttle NER-649S NER-549 S-PCM Receiver FM Receiver JRPR649 JRPR549 (PCM only) (FM only) HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 61: Gyro Connections

    NEJ-160 only) Gain C Rx Rudd Plug servo insert into rudd channel of receiver lead into Rudder servo insert into Aux 2 channel Rudd - SV of receiver Gyro unit Gain control HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 62: General Information

    2.2 Normal Display Normal Display Screen transmitter voltage modulation type model number model name (when names are entered) integrated timer HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 63: Aux 3 Function (Channel #8)

    When used in conjunction with the flight mode switch, Aux 3 switch. Travel adjustment is then available either through the (channel #8) is of the non-proportional variety having only a travel adjust function, or the programmable mixing function. HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 64: System Set-Up Mode Functions

    Pg. 68 Model Type Selection Pg. 68 Data Reset Pg. 69 Modulation Selection Pg. 70 Data Transfer Pg. 72 Input Selection – Aux 2, channels can be used for gyro sensitivity adjustment HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 65: Function Mode

    Pg. 87 Programmable Mixing 1 Pg. 87 Programmable Mixing 2 Pg. 87 Programmable Mixing 3 Pg. 91 Fail-Safe/Hold (PCM Only) Pg. 94 Trainer Pg. 95 Timer Setting Pg. 97 Servo Output Indicator HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 66: List Mode

    System Set-Up Mode System Mode info display SELECT CLEAR To Model Name function Function select Model selection (select model/ (1-10) model copy) To Aux 2 input select function HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 67: Copy Select Function

    To Model Type Selection function Press to change Press to change Changes input letter input letter arrow input letter at arrow to blank space only To Model Select/Copy position where arrow is function located HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 68: Model Type Selection

    Press simultaneously to exit the System Set-Up Mode SELECT CLEAR To Modulation Select Press to return to function factory preset data To Model Type Select function HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 69: Modulation Select

    TThe Modulation Selection Function enables your XP8103 to either the UP and DN, or the DN and SEL keys simultaneously to transmit to a variety of JR receivers that are already, or may soon be, in existence. You can select from either S-PCM or Z-PCM accept the new modulation type.

  • Page 70: Data Transfer

    CLEAR To Aux 2 input Transmitting/ Press to start select function Press + or - Receiving Mode transmitting keys to select data select To Modulation the receiving select function model number HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 71 CLR key to start transmitting. stand-by receiving condition receiving stand-by counter condition 0-100% SELECT CLEAR To Aux 2 input Transmitting/ Press to start select Receiving Mode transmitting select To Modulation select HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 72: Input Selection Function

    ON to access the system Set-Up Mode. Using the UP and DN keys, select Input Select Function and press the UP and #7) for remote gyro sensitivity, JR TEC-1000 carburetor DN keys simultaneously to access. operation, etc., this function should remain in the factory INH position.
  • Page 73 To Reverse Switch Reset Dual Rate Function Select function Channel Selection Increase or Value to 100% (dual rate or (Aile, Elev, Rudd, decrease Dual exponential) To Servo Output Auto Rudd) Rate Value Indicator HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 74 Function Mode SELECT CLEAR To Reverse Switch Press to inhibit function Channel Selection Use the + or - to (Press to select activate/inhibit To Servo Output Auto Rudd) Auto D/R Indicator HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 75: Sub-Trim Adjustment

    Press to reset function Channel Selection Increase or channels 1-4 Sub-trim value to (press to decrease and 5-8 factory preset (0) To Reverse Switch manipulate arrow) sub-trim value (2 Screens) function (L&R/U&D) HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 76 Press CLR key to reset value activate and (at arrow) to zero or to inhibit CLEAR Increase/Decrease value stunt trim function Arrow indicates channel to be adjusted Stunt Trim Value (max ± 125) HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 77 Press either the + the Throttle Hold or - keys to set the function to the To Stunt Trim Throttle Hold value factory pre-set function (-20% – +50%) inhibited (Off) position HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 78 Throttle Curve value to the factory 2: Output Value 50% function ↓ at the selected point preset, or INH 3. Inhibited NORM position. H: Output Value 100% ↓ ST 1 ↓ ST 2 HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 79 Normal Mode all 3 points together Throttle Trim (Points 1 and 3) Operating Throttle Trim Range Operating Range Point L Point L Throttle Stick Throttle Stick High High HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 80 Normally, flight mode 1 and 2 are used to increase engine RPM below half stick for forward flight maneuvers (idle up), and at this time any other trims are not active as the throttle will only operate/follow the current throttle curve values. HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 81 3. Inhibited ↓ adjusted position. H: Output Value 100% NORM (L, 1, 2, 3, H, EXP) ↓ ST 1 ↓ ST 2 ↓ HOLD (Only when Throttle Hold function is activated) HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 82 Stunt Mode/Aerobatic Throttle/Pitch Curve Examples Output Value Output Value Loop & Stall Turn Point L Point L Output Value Output Value Roll Point L Point L Output Value Autorotation Point L HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 83 Inverted Switch function Decrease the offset value When the Inverted Switch is in the ON postion, display flashes "ON" The Pitch Curve factory offset value (50%) is adjustable from 0-100% HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 84 To Inverted Switch (L or R, 0% -125%) arrow to the (0%) at the arrow function position to be position adjusted HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 85 A JR NEJ-1 20S or JR NEJ-1000 gyro system can be used This function is activated in conjunction with the rudder dual rate with either of these methods.
  • Page 86 ⌫INH⌫Manual⌫Auto rate values for arrow position and to increase or flight modes decrease Gyro Sensitivity value for NEJ 1000 Note: For NEJ120, set the 0 position at 100% t 0% HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 87 The figure on the following page F-S1 2 On at flight mode stunt #1 and stunt #2 positions shows Mix 1 is inhibited. F-S2 On at flight mode stunt #2 position HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 88 #1 and #2 allows you to manipulate one unless the operational switch selected is in the proper position to or all of the point values to create a non-linear “curve” of the activate the programmable mixing function. HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 89 As in the previous mixes, the first channel is considered the neutral position of the slave channel. master channel, with the second channel selected as the slave channel. HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 90 The programmable mixes can be turned on and off in flight using a variety of different switches. The chart at right lists the indication seen on the LCD display and its definitions. HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 91 XP8103 transmitter. you are transmitting in PPM. Fail-Safe is not applicable in the PPM mode. Refer to the Modulation Mode Selection Section for more information. HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 92 Press either the + desired Fail-Safe or - key to select postion, then press the time delay Clear key once to store ↓ settings Hold ↓ 0.25 Sec ↓ 0.5 Sec ↓ 1.0 Sec HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 93 - key to select press the Clear key once To Programmable desired channel either Hold or Fail- to store settings Mixing 6 Safe positions for each channel HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 94 To Fail-Safe (PCM Master) desired channel to be activated (Master- Only) or programmable Slave) mixing * When all channels are set for Master, condition is set to Normal Trainer HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 95 Accumulated time is for each model and returns to zero at 100 hours. You may use them as individual model’s maintenance Count start and stop operations are activated by the snap hours. roll/trainer switch. But when using it as the trainer’s master HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 96 Or to increase or decrease countdown timer settings NORMAL DISPLAY w/down timer function selected Timer setting time SELECT CLEAR Press to reset timer to Press either key zero (0) to start/stop timer HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 97 Press the UP and DN keys Press the DN and Select keys simultaneously to enter/exit simultaneously to access the the Function Mode Function Mode List Display SELECT CLEAR To Dual Rate Exponential function To Timer function HELI www.modelflight.com.au – World’s best source of JR products...

  • Page 98: Travel Adjust

    INH • ACT DOWN DOWN REVO STUNT OFFSET THRO HOLD INH • ACT HOLD RUDD OFFSET ACC MIX CHANNEL MIX1 OFF-ON ⌫ MIX2 OFF-ON ⌫ PROGRAM +POS -POS OFFSET MIX3 ⌫ HELI www.modelflight.com.au – World’s best source of JR products...
  • Page 99 Note: The Practical Application Section on page 1 34 provides a step-by-step procedure on programming a 5 or 6 servo equipped glider. Reference to this section is highly recommended prior to setting up your glider. GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 100: Control Identification And Location

    Elevator Channel Rudd Rudder Channel Ail 2 Right Aileron Channel (AIL 2) Flap Left Flap Channel for Dual Flaps Aux 2 Right Flap Channel for Dual Flaps Aux 3 Auxillary 3 Channel GLID www.modelflight.com.au – World’s best source of JR products...
  • Page 101 Input Keys AILE Aileron Channel ELEV Elevator Channel RUDD Rudder Channel GEAR Gear Channel AUX 1 Auxiliary 1 Channel (Pitch) AUX 2 Auxiliary 2 Channel (Gyro Sensitivity) AUX 3 Auxiliary 3 Channel GLID www.modelflight.com.au – World’s best source of JR products...
  • Page 102 Deluxe Switch Harness DSC Receptacle (JRPA001) (JRPA024) AUX1/Flap Flap Channel (Left) Aileron Retract Right Gear Channel NER-649S S-PCM Receiver RUDD (JRPR649) PCM Version NER-549S FM Receiver (JRPR549) FM Version ELEV AILE (Left) Spoilers GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 103: General Information 2.1 Input Key Functions

    2.2 Normal Display Normal Display Screen transmitter voltage modulation type model name (when model number names are entered) integrated timer GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 104: System Set-Up Mode Functions 3.1 System Set-Up Mode

    Pg. 107 Model Name Input Pg. 108 Model Type Selection Function Pg. 108 Data Reset Pg. 109 Modulation Selection Pg. 110 Model Data Transfer Pg. 112 Wing Type Selection Pg. 112 Flap Channel Input Selection GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 105: Elevator To Flap Mixing

    Programmable Mixing Pg. 125 Programmable Mixing Pg. 125 Programmable Mixing Pg. 125 Programmable Mixing Pg. 127 Fail-Safe (PCM Only) Pg. 130 Trainer Pg. 131 Timer Setting Pg. 133 Servo Output Monitoring GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 106: List Mode

    System Set-Up Mode System Mode info display SELECT CLEAR To Model Name function Function select Model selection (select model/copy) (1-10) To Info Display function GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 107: Copy Select Function

    To Model Type Selection function Press to change Press to change Changes input letter input letter arrow input letter at arrow to blank space only To model select/copy position where arrow is function located GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 108: Model Type Selection

    Press simultaneously to exit the System Set-Up Mode SELECT CLEAR To Modulation Select Press to return to function factory preset data To Model Type Select function GLID www.modelflight.com.au – World’s best source of JR products...
  • Page 109 The Modulation Selection Function enables your XP8103 to either the UP and DN, or the DN and SEL keys simultaneously to transmit to a variety of JR receivers that are already, or may soon be, in existence. You can select from either S-PCM or Z-PCM accept the new modulation type.
  • Page 110 SELECT CLEAR To Wing Type Transmitting/ Press to start Selection function Press + or - Receiving Mode transmitting keys to select select data To Modulation the receiving Select function model number GLID www.modelflight.com.au – World’s best source of JR products...
  • Page 111 CLR key to start transmitting. stand-by receiving condition receiving stand-by counter condition 0-100% SELECT CLEAR To Wing Type Selection function Transmitting/Receiving Press to start To Modulation mode select Select function transmitting GLID www.modelflight.com.au – World’s best source of JR products...
  • Page 112 (throttle stick). Channel 7's travel adjust operational value. • Flap servo travel adjustment is achieved with Flap Travel Trim adjustment for each control surface can be adjusted by the Adjustment. GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 113: Reverse Switch 1

    To Reverse Switch Reset Dual Rate Function Select function Channel Selection Increase or Value to 100% (Dual Rate or (Aile, Elev, Rudd, decrease Dual Exponential) To Servo Output Auto Rudd) Rate Value Indicator GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 114: Sub-Trim Adjustment 1

    Press to reset function Channel Selection Increase or channels 1-4 Sub-trim value to (press to decrease and 5-8 factory preset (0) To Reverse Switch manipulate arrow) sub-trim value (2 Screens) function (L&R/U&D) GLID www.modelflight.com.au – World’s best source of JR products...
  • Page 115 In Function Mode, use the UP and DN keys to select Elevator to Flap Mixing function and access by pressing the UP and DN keys simultaneously. Mixing Switch Is Forward FLP-D Flap Switch Down Position FLP-U Flap Switch Up Position Always On GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 116: Aileron To Flap Mixing

    Flap Mixing and access by pressing the UP and DN keys FLP - D Flap Switch Down Position simultaneously. F - U&D Flap Switch Up or Down Position Note: If differential mixing is being used, the flaps will also GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 117: Differential Aileron Mixing

    R/C aircraft, it is Note: Differential may also be obtained by using the travel best to correct for this common flight tendency. Aileron adjust. GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 118: Flap To Elevator Mixing

    FLP - D Flap Switch Down Position simultaneously. F - U&D Flap Switch Up or Down Position Selection of Operation Switch The switches for Mixing Function ON/OFF and 0 position are GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 119: Flap To Aileron Mixing

    Flap Switch is Up or Down Position Selection of Operational Switch Switches for Mixing Function ON/OFF position are listed in the chart at right and can be accessed with the + or - keys. When GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 120: Aileron To Rudder Mixing

    The lever switch position for Mixing Function ON/OFF is listed at right and can be accessed with the + or - keys. When the applicable switch is in the OFF position, SW OFF flashes in the GLID www.modelflight.com.au – World’s best source of JR products...
  • Page 121 Setting Mixing Value The mixing values can be set to two different settings by utilizing the butterfly switch. To reverse the operating direction, press the - key to increase the minus value. GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 122: Butterfly Mixing (Crow)

    POT 7, located on Trim Display Setting Operation Pot 5: Flaperon Flap Trim ⌫Channel⌫INH Pot 6: Dual Flap-Flap Trim Pot 7: Aileron Trim of Dual Flap Each trim's operational direction GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 123: Trim Offset Memory

    Clear to store SELECT CLEAR To Flap Knob Adjustment function Press Select, then Clear to reset all trim values to 0 To Differential Aileron Mixing (if activated) or Snap Roll function GLID www.modelflight.com.au – World’s best source of JR products...
  • Page 124 Note: If the offset value is too large, a warning will sound when simultaneously to exit the Trim Memory Offset function. you return the trim levers to center, and the display shown in (4) will appear. GLID www.modelflight.com.au – World’s best source of JR products...
  • Page 125 Programmable mixes 1 and 2 have the capability for multi-point On ⌫ MIX ⌫ FLP-D ⌫ FLP-U programmable mixing. The graphic mixing curve, located on the On ⌫ MIX ⌫ FLP-D ⌫ FLP-U On ⌫ MIX ⌫ BTFYO ⌫ BTFY1 GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 126: Programmable Mixing (1-6)

    2. Mixes 5 and 6 incorporate include mixing. effected to preset flap to aileron mixing (2 steps mixing). Note about Mixing 2 and 4: When the master channel is spoiler, its operation is included in spoiler trim operations. GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 127: Fail-Safe/Hold

    Press either the + desired Fail-Safe or - key to select postion, then press the time delay Clear key once to store ↓ settings Hold ↓ 0.25 Sec ↓ 0.5 Sec ↓ 1.0 Sec GLID www.modelflight.com.au – World’s best source of JR products...
  • Page 128 3. Confirmation of proper fail-safe presets/holds is made by was experienced. When a clear signal is restored, the Hold turning the transmitter OFF and observing the aircraft’s control Function releases, and control of the airplane returns to you. functions. GLID www.modelflight.com.au – World’s best source of JR products...
  • Page 129 Fail-Safe is activated When switch is in lower position, Hold (last command) is activated Value represents the stored position of fail-safe mode of the channel indicated by the cursor GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 130: Trainer

    To Fail-Safe (PCM Only) position (All Master) desired channel to be activated or programmable mixing (Master-Slave) function When all channels are set for Master, condition is set to Normal Trainer GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 131: Timer

    Accumulated time is for each model and returns to zero at 100 hours. You can use them as individual model’s maintenance Count start and stop operations are activated by the snap hours. roll/trainer switch. But when using it as the trainer’s master GLID www.modelflight.com.au – World’s best source of JR products...
  • Page 132 NORMAL DISPLAY w/countdown timer function selected Timer setting time SELECT CLEAR Press to reset timer Press either key to zero to start/stop timer GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 133: Servo Output Indicator

    Press the UP and DN keys Press the DN and Select keys simultaneously to enter/exit simultaneously to access the the Function Mode Function Mode List Display SELECT CLEAR To Dual Rate Exponential function To Timer function GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 134: Practical Applications

    4. Use the UP key again to move to the S.TRIM (Sub-Trim Flap Servo Arm Angle Function). With the SEL key, move to the next screen and with the CH key move the cursor arrow to FLAP and AUX 2 and GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 135: Launch And Reflex Presets

    Landing position for this switch display reads Butterfly. Now use the CH key to move the cursor will be toward the rear of the transmitter (POS. 1 in your display). GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 136: Full Span/Variable Crow/Camber

    2. Leave the left stick in that position and use the CH key to move to SPOI-AILE. Use the data keys to move the ailerons down the same amount as the flaps. You may have to fine tune GLID www.modelflight.com.au – World’s best source of JR products...

  • Page 137: Special Mixing

    1 . From the aileron/flap mix, use the DN key to move to ELEV- Many pilots choose to leave this function on at all times. FLAP mix. Now push the CH key to move to switch select. In GLID www.modelflight.com.au – World’s best source of JR products...
  • Page 138 XP8103 DATA SHEET GLID SPCM • ZPCM • PPM FAIL-SAFE (SPCM • ZPCM) DIFFERENTIAL GLID www.modelflight.com.au – World’s best source of JR products...
  • Page 139 – World’s best source of JR products EXCLUSIVELY DISTRIBUTED BY HORIZON HOBBY DISTRIBUTORS, INC.
  • Page 140 NORMAL DISPLAY w/countdown timer function selected Timer setting time SELECT CLEAR Press to transfer the correct timer Press either key data for the current model selected, to start/stop timer or to reset timer to zero www.modelflight.com.au – World’s best source of JR products...
  • Page 141 If the clear key is not pressed after the model select function, the time setting from the current model will be changed to the time setting of the previous model. www.modelflight.com.au – World’s best source of JR products...

This manual is also suitable for:

Xp8103

Table of Contents

Save PDF