Scale Setup - Elektron Analog Four MKII Quick Manual

SEQUENTIAL will change patterns after the currently playing pattern reaches its end.
This mode is the default mode.
DIRECT START will immediately change patterns. The new pattern will start playing
from the beginning.
DIRECT JUMP will immediately change patterns. The new pattern will start playing
from the position where the previous pattern left off.
TEMP JUMP will immediately change patterns. The new pattern will start playing from
the position where the previous pattern left off. It will play the new pattern once and
then revert to the pattern that was playing before the change.

6.9 SCALE SETUP

Pattern scale sets the number of steps in a pattern and thus the total amount of pattern
pages. The leftmost number selects the number of steps in the pattern. The maximum
number of steps available to the pattern is determined by the total length, set by the sec-
ond parameter. This can be either 16, 32, 48 or 64 steps.
The third parameter is the tempo multiplier with seven different settings.
1. Press [FUNC] + [PAGE] to access the scale menu.
2. Use the [ARROW] keys [LEFT] and [RIGHT] to toggle between step length
and scale.
3. Use the [ARROW] keys [UP] and [DOWN] to change the settings. You can also use
the LEVEL knob to change settings.
27