Starting The Engine - Polaris RANGER XP 4X4 700 EFI Owner's Manual

Polaris industries automobile user manual
Table of Contents

Advertisement

Starting the Engine

WARNING
Engine exhaust contains poisonous carbon monoxide and can
cause loss of consciousness resulting in severe injury or death.
Never run an engine in an enclosed area.
1. Sit in the driver's seat and fasten the seat belt.
2. Engage the park brake.
3. Shift the transmission to neutral.
4. Apply the brakes while starting the engine.
NOTE:
Do not press the throttle pedal while starting the engine.
5. Turn the ignition key past the ON/RUN position to START.
Engage the starter for a maximum of five seconds. Release the key
when the engine starts.
6. If the engine does not start within five seconds, release the ignition
switch and wait five seconds. Repeat steps 5 and 6 until the engine
starts.
7. Vary the engine RPM slightly with the throttle to aid in warm up
until the engine idles smoothly.
CAUTION
Operating the vehicle immediately after starting could cause
engine damage. Allow the engine to warm up for several minutes
before operating the vehicle.
OPERATION
35

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RANGER XP 4X4 700 EFI and is the answer not in the manual?

Questions and answers

Bradley
February 16, 2025

Is it a wet or dry clutch

1 comments:
Mr. Anderson
February 16, 2025

The Polaris RANGER XP 4X4 700 EFI is equipped with a PVT (Polaris Variable Transmission) system, which uses a dry clutch system.

This answer is automatically generated

This manual is also suitable for:

Ranger xp 4x4 700 efi 2006Ranger 6x6 700 efi 2006

Table of Contents

Save PDF