Table of Contents
Advertisement
When mounting on the dashboard, press the
suction surface firmly to the Dashboard pad and
latch the lever to attach the suction holder. Remove
the adhesive film from the Dashboard pad, and
then press the pad firmly to the dashboard.
• Carefully choose the installation location.
The adhesive on the Dashboard pad is very
strong and cannot be easily removed or
relocated once attached.
• Attach the Dashboard pad to a flat area of
the dashboard. If the Dashboard pad cannot
make full contact with the dashboard, it may
not properly support the Vehicle dock.
• Do not attach the Dashboard pad to a hot
dashboard. Allow the dashboard to cool
before installing the Vehicle dock.
5
Adjust the angle of the Vehicle dock.
4
Advertisement
Table of Contents
